Which tool installs this fastener?
Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".
Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A
Tooling for PLT5170-06-07
PLT5170-06-07 (Visu-Lok, 3/16") installs with MP550DN-6AA (MP550 with MPP-08 + MP-06) Standard.
Other tools that work6 process-doc listings
As the fastener's own process document lists them
- MH75DN-6AA (MH75 with MHPDN-01 + MH-06) Standard Monogram PLT5002 Rev N p.10 ↗
- MRT550DN-6AA (MRT550 with MRTP-08 + MRT-6) Right angle Monogram PLT5002 Rev N p.6 ↗
- MRC550DN-6AA (MRC550 with MRCPDN-01 + MRC-06) Close quarter Monogram PLT5002 Rev N p.7 ↗
- MRC250DN-6AA (MRC250 with MRCRPDN-01 + MRHC-6) Close quarter Monogram PLT5002 Rev N p.8 ↗
- MR550DN-6AA (MR550 with MRPDN-1 + MR-6) Right angle Monogram PLT5002 Rev N p.9 ↗
- MHC75BF3-6AA (MHC75A with MHCPDN-01 + MHC-06) Close quarter Monogram PLT5002 Rev N p.11 ↗
Sources7
- Monogram PLT5002 Rev N (Visu-Lok II install spec), p.4, Table 1 ↗
- Wrench adapter (turns screw) MP-06; nose adapter (holds nut) MPP-08. A / B / C Ref. 1.37 / 1.25 / 0.56.
- Monogram PLT5002 Rev N (Visu-Lok II install spec), p.10, Table 7 ↗
- Wrench adapter MH-06; nose adapter MHPDN-01.
- Monogram PLT5002 Rev N (Visu-Lok II install spec), p.6, Table 3 ↗
- Wrench adapter MRT-6; nose adapter MRTP-08. A / B / C Ref. .56 / .56 / 0.68.
- Monogram PLT5002 Rev N (Visu-Lok II install spec), p.7, Table 4 ↗
- Wrench adapter MRC-06; nose adapter MRCPDN-01. A / B Ref. .44 / .69.
- Monogram PLT5002 Rev N (Visu-Lok II install spec), p.8, Table 5 ↗
- Wrench adapter MRHC-6; nose adapter MRCRPDN-01. A Ref. .69.
- Monogram PLT5002 Rev N (Visu-Lok II install spec), p.9, Table 6 ↗
- Wrench adapter MR-6; nose adapter MRPDN-1. A / B / C Ref. 1.63 / 1.51 / 0.56.
- Monogram PLT5002 Rev N (Visu-Lok II install spec), p.11, Table 8 ↗
- Wrench adapter MHC-06; nose adapter MHCPDN-01.
Diameter -6 (3/16"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Compatibility matrixNose by fastener, brand and diameter
Each cell lists the noses the brand's own catalog names for that fastener and diameter. "Not documented" means no catalog on file names one, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next · 3 Quote
Buy the tooling with the fasteners
Add set to quote puts the nose, the tool and any adapters on the one quote, each with its catalog citation.