← Tooling guide

Which tool installs this fastener?

Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".

Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A

Tooling for NAS1728V3-15E

NAS1728V3-15E (Taper-Lok tapered-shank interference-fit bolts (NAS1724 / NAS1728)): the process document lists these tools.

No per-size tool and nose table is on file for this family: see Sources.

Taper-Lok tapered-shank interference-fit bolts (NAS1724 / NAS1728) tool tables

Sources2
  1. AFFDL-TR-75-93 Interference-Fit-Fastener Investigation, p.39, Figure A-2a ↗
    • "The reamer shown in Figure A-2a is for the drilling of flush-head-type fastener holes in which both the hole drilling and countersinking are accomplished in one operation." Reamers "are categorized into nominal diameters, head types, material, and group size similar to that used for the fasteners."
  2. AFFDL-TR-75-93 Interference-Fit-Fastener Investigation, p.39, Figure A-2b ↗
    • "The other reamer (Figure A-2b) is used for drilling holes for the protruding head-type fastener. In both cases, the drill cutting lips are on the end of the tool and the reaming flutes on the side."

Not documented

  • The Taper-Lok tapered-shank interference-fit bolts (NAS1724 / NAS1728) process document names tools but prints no per-size tool and nose (adaptor) table: No manufacturer tool table is public: the Taper-Lok installation specification ("BPS148") and reference manual are cited in AFFDL-TR-75-93 by title only. Tool names come from that 1975 USAF-sponsored report..

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Compatibility matrixNose by fastener, brand and diameter
FastenerTool brand-4-5-6-8-10-12
CherryMAX® / NAS9301 to NAS9312
CR3213-6-02
CherryH701B-456H747-456H753A-456H781A-456H782H680B200AH701B-456H747-456H753A-456H781A-456H782H680B200AH701B-456H747-456H753A-456H781A-456H782H680B200AH84A-8H828-8H829-8H827-8not made in this sizenot made in this size
Huck99-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-1336not documentednot made in this sizenot made in this size
Gage Bilt456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-704-35456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-749-35not documentednot made in this sizenot made in this size
HuckMAX™ (HR32xx)
HR3213-6-02
Cherrynot documentednot documentednot documentednot documentednot documentednot documented
Huck99-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-1336not documentednot documentednot documented
Gage Bilt456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-701-17456MAX-704-54RA456MAX-704-43OS456MAX-701-17456MAX-704-54RA456MAX-704-43OSnot documentednot documentednot documented
HUCK-CLINCH® (HC32xx, NAS93xxBH)
HC3213-6-02
Cherrynot documentednot documentednot documentednot documentednot documentednot documented
Huck99-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-133699-344299-344399-133399-133499-133599-1336not documentednot documentednot documented
Gage Biltnot documentednot documentednot documentednot documentednot documentednot documented
Allmax® (Allfast AF32xx)
AF3213-6-02
Cherrynot documentednot documentednot documentednot documentednot documentednot documented
Hucknot documentednot documentednot documentednot documentednot documentednot documented
Gage Biltnot documentednot documentednot documentednot documentednot documentednot documented
NAS pull lockbolts (pin and collar)
NAS1446-10
CherryH513-04-20H513-05-35H513S-05-20H513S-05-35H513-06-20H513S-06-24H513-08-35H513S-08-24H513S-10-42H513S-12-42
Huck99-265199-265499-2549S99-2550S99-3703S99-3703S-199-2552S99-2553S99-255599-255699-370499-3704-199-255899-255999-295499-256499-256599-295299-370599-3705-199-256199-256299-256799-256899-295399-1720DG99-1720DGC99-257099-257199-295799-1756DG
Gage Biltnot documentedNASS05-2480-20NASS05-204C-30OSNAS06-2480-20NAS06-204C-30OSNAS08-2480-20NAS08-204D-30OSnot documentednot documented

Each cell lists the noses the brand's own catalog names for that fastener and diameter. A dash (–) means the fastener is not made in that diameter, per its catalog's size list. "Not documented" means the size exists, or its range is not on file, and no catalog on file names a nose for it, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Tooling guide by family →Tooling shop →