Which tool installs this fastener?
Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".
Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A
Tooling for HL18-8-10
HL18-8-10 (Hi-Lok, 1/4"): the process document lists these tools for this size.
- Hi-Lok adaptor toolsStandard power or hand tools with Hi-Lok adaptor toolsHi-Shear Hi-Lok and Hi-Lok/Hi-Tigue Installation Instructions p.7 ↗
- HLA1051Straight Driver(-5, -6, -8, -10)Hi-Shear Hi-Lok and Hi-Lok/Hi-Tigue Installation Instructions p.8 ↗
- HLA200820° Offset Ratchet Wrench Driver(-5, -6, -8)Hi-Shear Hi-Lok and Hi-Lok/Hi-Tigue Installation Instructions p.8 ↗
- HLA1008Straight Collar Automatic-Feed Driver(-6, -8)Hi-Shear Hi-Lok and Hi-Lok/Hi-Tigue Installation Instructions p.8 ↗
- HLH311Hand Tool AssemblyHi-Shear Hi-Lok and Hi-Lok/Hi-Tigue Installation Instructions p.9 ↗
No per-size tool and nose table is on file for this family: see Sources.
Sources4
- Hi-Shear Hi-Lok and Hi-Lok/Hi-Tigue Installation Instructions, p.7, H. Tooling ↗
- "Hi-Lok adaptors tools are fitted to high speed, pistol grip and ratchet wrench drivers in straight, 90°, offset, extension and automatic collar-feed configurations. Refer to Hi-Shear Corporation's Hi-Lok/Hi-Tigue Tool Catalog for a complete description of a wide variety of Hi-Lok drivers and accessories."
- Hi-Shear Hi-Lok and Hi-Lok/Hi-Tigue Installation Instructions, p.8, H.1 Standard Power Drivers ↗
- "installs Hi-Lok Fasteners in 5/32, 3/16, 1/4 and 5/16 inch sizes. Extended and offset adaptors are also available."
- "installs Hi-Lok Fasteners in 5/32, 3/16 and 1/4 inch sizes. Extended sockets are available. Larger drivers will install larger size Hi-Loks."
- Hi-Shear Hi-Lok and Hi-Lok/Hi-Tigue Installation Instructions, p.8, H.2 Automatic Collar-Feeding Drivers ↗
- "The HI-LOK Automatic Feed Driver assembles HI-LOK collars (3/16 and 1/4 dia.) onto HI-LOK pins without reloading and at an assembly rate of up to 45 per minute."
- Hi-Shear Hi-Lok and Hi-Lok/Hi-Tigue Installation Instructions, p.9, H.3 Hand Tools ↗
- "The Hi-Lok fastener may be installed with hand tools, Allen hex keys and open-end or ratchet type wrenches."
Not documented
- The Hi-Lok process document names tools for this size but prints no per-size tool and nose (adaptor) table; the maker's tool catalog it points to is not on file.
Diameter -8 (1/4"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Compatibility matrixNose by fastener, brand and diameter
Each cell lists the noses the brand's own catalog names for that fastener and diameter. "Not documented" means no catalog on file names one, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.
Next · 3 Quote
Buy the tooling with the fasteners
Add set to quote puts the nose, the tool and any adapters on the one quote, each with its catalog citation.