Which tool installs this fastener?
Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".
Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A
Tooling for CR2172-8-4
CR2172-8-4 (CherryLOCK, 1/4"): the process document lists these tools for this size.
- G700Hydro-shift riveterCherry CA-1013 p.8 ↗
- G784Hydro-shift riveterCherry CA-1013 p.8 ↗
- G689Hydro-shift riveterCherry CA-1013 p.8 ↗
- G686B-SHydro-shift riveterCherry CA-1013 p.8 ↗
- G695BG695B Right Angle RiveterCherry CA-1013 p.11 ↗
- H681-8CH681 pulling head, Universal Head / Countersunk Head (NASM20426)(-8)Cherry CA-1013 p.9 ↗
- H681-8SH681 pulling head, Countersunk Head (NAS1097)(-8)Cherry CA-1013 p.9 ↗
- H690-8UH690 pulling head, Universal Head(-8)Cherry CA-1013 p.11 ↗
- H690-8CH690 pulling head, Countersunk Head(-8)Cherry CA-1013 p.11 ↗
No per-size tool and nose table is on file for this family: see Sources.
Sources3
- Cherry CA-1013 (CherryLOCK process manual), p.8, CherryLOCK Hydro-shift System ↗
- "Capable of installing rivet group A only" (CA-1013 p.8).
- "Capable of installing rivet group A, B and C" (CA-1013 p.8).
- Cherry CA-1013 (CherryLOCK process manual), p.11, Limited Access Applications, G695B Right Angle Riveter ↗
- "Designed specifically for installing CherryLOCK rivets in limited access areas. The power unit rests on the floor and is connected to the right angle unit with 8 feet of hose." "This tool installs all bulbed CherryLOCK rivets and installs up to -04 grip wiredraw CherryLOCK rivets."
- For the G695B. "Also available in 9/16", 15/16" and 1-1/2" extensions ... add length of extension to part number (e.g. H690-4U-15/16")".
- Cherry CA-1013 (CherryLOCK process manual), p.9, Selection Of Proper Hydro-shift Pulling Head, H681 Series ↗
- "A separate pulling head is required for each diameter CherryLOCK rivet. It is acceptable that countersunk (C) pulling heads be used for installing both universal and countersunk head CherryLOCK rivets." Dims A and B as drawn on the CA-1013 p.9 figure.
Diameter -8 (1/4"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Compatibility matrixNose by fastener, brand and diameter
Each cell lists the noses the brand's own catalog names for that fastener and diameter. A dash (–) means the fastener is not made in that diameter, per its catalog's size list. "Not documented" means the size exists, or its range is not on file, and no catalog on file names a nose for it, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.