Which tool installs this fastener?
Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".
Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A
Tooling for BG2082-10-04
BG2082-10-04 (5/16"): no tool catalog or process document on file names tooling for this part number. Not documented is not the same as none existing.
Sources0
Not documented
- The OSI-Bolt brochure lists pneumatic pistol, close quarter and right angle tooling and says the fastener "can be installed with standard NAS1675 installation tooling"; the tool table lives in BG2003, which is not public.
- No tool catalog or process document on file names tooling for BG2082-10-04 at -10.
Diameter -10 (5/16"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Compatibility matrixNose by fastener, brand and diameter
Each cell lists the noses the brand's own catalog names for that fastener and diameter. "Not documented" means no catalog on file names one, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.
Next · 3 Quote
Buy the tooling with the fasteners
Add set to quote puts the nose, the tool and any adapters on the one quote, each with its catalog citation.