Which tool installs this fastener?
Enter a fastener part number for the exact nose or pulling head at its diameter, the tools that take it and any adapters, from each tool maker's catalog. Or enter a tool, nose or adapter PN to see what it installs across brands. Cross-brand fits are shown only where a catalog states them; everything else reads "not documented".
Try CR3213-6-02 · HC3213-6-02 · AF3213-6-02 · NAS1446-10 · MBF2110-6-300 · HL10-6-8 · H701B-456 · G83A
Tooling for MBF2112-6-200
MBF2112-6-200 (Composi-Lok II, 3/16") installs with MP550BFDN-6AA (MP550BF with MPPBF-08 + MPBF-06) Standard.
Other tools that work6 process-doc listings
As the fastener's own process document lists them
- MH75BFDN-6AA (MH75 with MHPDN-01 + MHBF-06) Standard Monogram MBF2003 Rev AG p.9 ↗
- MRT550BFDN-6AA (MRT550BF with MRTPBF-08 + MRTBF-6) Right angle Monogram MBF2003 Rev AG p.5 ↗
- MRC550BFDN-6AA (MRC550 with MRCPDN-01 + MRCBF-06) Close quarter Monogram MBF2003 Rev AG p.6 ↗
- MRCR250BFDN-6AA (MRCR250 with MRCRPDN-01 + MRCRMWBF-06) Close quarter Monogram MBF2003 Rev AG p.7 ↗
- MR550BFDN-6AA (MR550 with MRPDN-01A + MRBF-06) Right angle Monogram MBF2003 Rev AG p.8 ↗
- MHC75BFDN-6AA (MHC75A with MHCPDN-01 + MHCBF-06) Close quarter Monogram MBF2003 Rev AG p.10 ↗
Sources7
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.4, Table 1 ↗
- Wrench adapter (turns screw) MPBF-06; nose adapter (holds nut) MPPBF-08. A / B / C Ref. 1.81 / 1.70 / 0.56.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.9, Table 6 ↗
- Wrench adapter MHBF-06; nose adapter MHPDN-01. A / B Ref. 1.51 / .56.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.5, Table 2 ↗
- Wrench adapter MRTBF-6; nose adapter MRTPBF-08. A / B / C Ref. 1.80 / 1.68 / 0.56.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.6, Table 3 ↗
- Wrench adapter MRCBF-06; nose adapter MRCPDN-01. A / B Ref. .44 / .69.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.7, Table 4 ↗
- Wrench adapter MRCRMWBF-06; nose adapter MRCRPDN-01. A Ref. .69.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.8, Table 5 ↗
- Wrench adapter MRBF-06; nose adapter MRPDN-01A. A / B / C Ref. 1.63 / 1.51 / 0.56.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.10, Table 7 ↗
- Wrench adapter MHCBF-06; nose adapter MHCPDN-01.
Diameter -6 (3/16"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Compatibility matrixNose by fastener, brand and diameter
Each cell lists the noses the brand's own catalog names for that fastener and diameter. "Not documented" means no catalog on file names one, not that none exists. Gage Bilt states its tools and noses are interchangeable with Huck, Cherry and Allfast; its cross-reference (on each tool page) gives its PN for each Huck or Cherry PN. Allfast tooling is a gap until an Allfast tool catalog is on file. A NAS93xx blind rivet's tooling follows its maker: the Cherry cells are for Cherry-made parts, the Huck cells for Huck-made (HuckMAX™, HUCK-CLINCH®). NAS lockbolt cells name the standard itself.
Next · 3 Quote
Buy the tooling with the fasteners
Add set to quote puts the nose, the tool and any adapters on the one quote, each with its catalog citation.