CherryMAX, Cherry
CR3252-5-12
Cherry's bulbed blind rivet: 50 / 75 KSI shear, universal, 100° flush and NAS 1097 heads.

- Head 100° flush head
- Diameter 5/32" (-5), oversize diameter
- Grip .688-.750"
- Material 5056 alum
CR3252-5-12
- What it is
- CherryMAX (Cherry), 100° flush head, 5/32" (-5), oversize diameter diameter, max grip .750" (-12 = 12/16"), grip range .688-.750" (CA-1011 p.13)
- Equivalents
- Install tooling, by who made the part
- Cherry-made: H701B-456 pulling head on a G704B, G747 or G800 riveter
- Other makers: not documented. Check the maker on the CoC or packaging, then ask that maker or a tooling specialist.
The nose follows the maker, not the stock number: check the maker on the CoC or packaging.
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Reference only: the drawing and its process spec govern. How to read this
Install tool G747, G704B or G800 · Exact nose, every brand · Variable stack? Plan grips
CAD for CR3252-5-12
| Family | CherryMAX (Cherry) |
|---|---|
| Head style | 100° flush head (source: Cherry CA-1011 (CherryMAX), p.13 100° flush head / oversize diameter) |
| Nominal diameter | 5/32" (-5), oversize diameter |
| Grip | max grip .750" (-12 = 12/16"), grip range .688-.750" (CA-1011 p.13) |
| Material | 5056 alum. alloy sleeve, 15-7 PH CRES stem, A-286 CRES lock collar |
Decoded from the published numbering scheme; not a claim that this exact dash number is a stocked SKU.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Dimensions
| D | Sleeve shank diameter | .173+.003 -.001 |
| A | Head diameter, to theoretical projection | .286±.004 ① |
| B | Head depth (drawn derived from A, D and the printed angle) | .047(ref). |
| Z | Stem length above the head, as supplied | .94(ref) |
| Hole Limits | Drilled hole | .176-.180 |
| Grip limits | Dash 5-12 | .688-.750 |
All dimensions (11)Fewer dimensions
| BK | Min blind clearance for satisfactory installation | .395min |
| C (Aluminum) | Head edge height (land), by sleeve material | .002-.012 |
| C (Monel) | Head edge height (land), by sleeve material | .005-.015 |
| L | Head top to end of sleeve | .871+.000 -.030 |
| K | Head top to blind end of stem | 1.10max |
As printed on CA-1011 p.13 ↗. Letters match the drawing.
Also printed in CA-1011 for this part
| Single shear | 1245 lbs (sheet thickness 2X.187) (CA-1011 p.7) |
|---|---|
| Tensile | 530 lbs (CA-1011 p.7) |
| Drill size | #16 (hole .176-.180) (CA-1011 p.16) |
| Countersink C | .283-.289 (MS20426 100° Head column) (CA-1011 p.17) |
| Installed flushness | A max .010”, B max .020”. Locking element flush with the top of the rivet head within ±.005. (CA-1011 p.18) |
| Materials CR3252 | Sleeve 5056 ALUM. ALLOY QQ-A-430 (CHEM FILM MIL-DTL-5541 PLAIN COLOR); stem 15-7 PH CRES AMS 5657 (CAD PLATE QQ-P-416, TYPE I CL. 2 OR PASSIVATE AMS 2700); lock collar A-286 CRES AMS 5731 (PASSIVATE AMS 2700) (CA-1011 p.13) |
| Ultimate shear strength | 50,000 PSI, max temperature 250° F (at room temperature) (CA-1011 p.7) |
Series and strength (datasheet)
CR3xxx · e.g. CR3242-6-04
5056 aluminum sleeve / alloy steel stem (50KSI shear); 5056 aluminum sleeve / CRES stem (50KSI); Monel sleeve / CRES stem (75KSI); INCO 600 sleeve / INCO X-750 stem (75KSI): Cherry CA-1011 p.4.
Datasheet (PDF) ↗To scale from Cherry CA-1011 ↗ p.13.Drawing notes
Model: CA-1011 p.13
Envelope model, not manufacturer CAD.Model details
CR3252-5-12, manufacturer nominal. Simplified component model from Cherry CA-1011 p.13 printed dimensions. Manufacturer nominal: printed values, the mean where only two limits are printed. Flush heads hold the printed head angle; the head depth is derived. Not manufacturer CAD. Verify against the current catalog before use. One named solid per component, as Cherry names them (CherryMAX: SLEEVE, STEM, LOCKING COLLAR, DRIVING ANVIL; CherryLOCK: SLEEVE, STEM, LOCK RING). Cherry dimensions only the sleeve and the stem's envelope (Z, K, not to exceed D): the stem's detail, the sleeve's bore and head recess, the collar and the anvil are scaled from Cherry's own figures and listed as scaled in the STEP header. The STEP file is an assembly: each component is its own named part with its own colour. STL comes as the whole part or one component at a time. Axis +Z, head up, z = 0 at the face the head bears on. STEP is in inches; STL is written in millimetres.
CR3252 grip chart: 5/32" (-5), oversize diameter
Every catalogued max-grip dash number at this diameter. Stack thickness must fall inside the fastener's grip range: see the design calculators.
Other diameters at this grip:
Pulled stem / bulbing · 4 steps
1/4Inserted
“The CherryMAX® Rivet is inserted into the prepared hole. The pulling head (installation tool) is slipped over the rivet’s stem. Applying a firm, steady pressure, which seats the rivet head, the installation tool is then actuated.”
Cherry CA-1011 (CherryMAX), p.3, Installation ↗
Drawing traced from: Features figure.
Source images (4): patent and government drawings
A patent drawing shows the patented design, which can differ in detail from today's catalog part. Each image says why it is tied to this family.




Required tooling, every brand
CR3252-5-12 (CherryMAX, 5/32") installs with nose H701B-456 on a G704B, G747 or G800 riveter.
Other tools that work3 more setups · 18 process-doc listings
- H701B-456H747-456standardonG746AorG83AG84+ adapter744-300Cherry CA-1015 p.5 ↗Cherry CA-1001 p.22 ↗
- H753A-456right angle·H781A-456H782offsetonG746AorG784+ adapter680B205orG83AG84+ adapter744-300Cherry CA-1015 p.5 ↗Cherry CA-1001 p.22 ↗Cherry 2015 catalog p.26 ↗
- H680B200AstandardonG784Cherry 2015 catalog p.26 ↗
As the fastener's own process document lists them
- G747, G704B or G800 with H701B-456 Standard Cherry CA-1015 p.5 ↗
- G746A with H701B-456 Standard Cherry CA-1015 p.5 ↗
- G83A or G84 with H701B-456 + 744-300 Standard Cherry CA-1015 p.5 ↗
- G747, G704B or G800 with H747-456 Standard Cherry CA-1015 p.5 ↗
- G746A with H747-456 Standard Cherry CA-1015 p.5 ↗
- G83A or G84 with H747-456 + 744-300 Standard Cherry CA-1015 p.5 ↗
- G747, G704B or G800 with H781-456 Offset Cherry CA-1015 p.5 ↗
- G746A with H781-456 Offset Cherry CA-1015 p.5 ↗
- 10 more on the family tool tables.
Other brands' noses2 · 21 statements
Gage Bilt, for CherryMAX®, Allmax® or HuckMAX™ / HUCK-CLINCH® rivets per Gage Bilt
- 456MAX-701-17standard·456MAX-704-54RAright angle·456MAX-704-43OSoffsetonGB704Gage Bilt 2017 p.43 ↗
- 456MAX-704-35standardonGB704Gage Bilt 2017 p.41 ↗
Cross-brand fit, only where a catalog says so
- Cherry says G83A fits Huck 230, 362 (bayonet mount) (Huck) Cherry CA-1001 p.7 ↗
G83A bayonet mounting system, "common for G83A and G84 (compatible to Huck 230, 362 models."
- Cherry says G84 fits Huck 230, 362 (bayonet mount) (Huck) Cherry CA-1001 p.7 ↗
G84 bayonet mounting system, "common for G83A and G84 (compatible to Huck 230, 362 models)."
- Gage Bilt says 456MAX-701-17 replaces H701B-456 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-701-17 (nose assembly) for H701B-456.
- Gage Bilt says GB704 replaces G704B (Cherry) Gage Bilt 2017 p.153 ↗
Gage Bilt's cross-reference lists GB704 (installation tool) for G704B.
- Gage Bilt says GB704SH replaces G704B-40SH (Cherry) Gage Bilt 2017 p.153 ↗
Gage Bilt's cross-reference lists GB704SH (install tool / split handle) for G704B-40SH.
- Gage Bilt says GB704 replaces G747 (Cherry) Gage Bilt 2017 p.153 ↗
Gage Bilt's cross-reference lists GB704 (installation tool) for G747.
15 more statements
- Gage Bilt says 456MAX-704-17 replaces H747-456 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-704-17 (nose assembly) for H747-456.
- Gage Bilt says 456MAX-704-54RA replaces H753A-456 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-704-54RA (nose assembly - rt. angle) for H753A-456.
- Gage Bilt says 456MAX-704-40OS replaces H782 (Cherry) Gage Bilt 2017 p.156 ↗
Gage Bilt's cross-reference lists 456MAX-704-40OS (nose assembly - offset) for H782.
- Gage Bilt says GB730 replaces G83A (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists GB730 (installation tool) for G83A.
- Gage Bilt says GB731 replaces G84 (Cherry) Gage Bilt 2017 p.154 ↗
Gage Bilt's cross-reference lists GB731 (installation tool) for G84.
- Gage Bilt says 456MAX-680-31 replaces H680B200A (Cherry) Gage Bilt 2017 p.155 ↗
Gage Bilt's cross-reference lists 456MAX-680-31 (nose assembly) for H680B200A.
- Gage Bilt says GB784 replaces G784 (Cherry) Gage Bilt 2017 p.153 ↗
Gage Bilt's cross-reference lists GB784 (installation tool) for G784.
- Gage Bilt says 456MAX-701-17 replaces 99-1479 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-701-17 (nose assembly) for 99-1479.
- Gage Bilt says 456MAX-701-17 replaces 99-3442 (Huck) Gage Bilt 2017 p.149 ↗
Gage Bilt's cross-reference lists 456MAX-701-17 (nose assembly) for 99-3442.
- Gage Bilt says GB704 replaces 2013 (Huck) Gage Bilt 2017 p.106 ↗
Gage Bilt's cross-reference lists GB704 (installation tool) for 2013.
- Gage Bilt says 456MAX-704-54RA replaces 99-1334 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-704-54RA (nose assembly - rt. angle) for 99-1334.
- Gage Bilt says 456MAX-704-43OS replaces 99-1333 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-704-43OS (nose assembly - offset) for 99-1333.
- Gage Bilt says 456MAX-749-35 replaces 99-3442 (Huck) Gage Bilt 2017 p.149 ↗
Gage Bilt's cross-reference lists 456MAX-749-35 (nose assembly) for 99-3442.
- Gage Bilt says 456MAX-749-35 replaces 99-1335 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-749-35 (nose assembly) for 99-1335.
- Gage Bilt says 456MAX-704-40OS replaces 99-1336 (Huck) Gage Bilt 2017 p.142 ↗
Gage Bilt's cross-reference lists 456MAX-704-40OS (nose assembly - offset) for 99-1336.
If your part was made by another maker1
A cross-referenced part number is a different maker's part. Its tooling is that maker's: an equivalent fastener does not make the noses interchangeable.
NAS9305E-5-12 Identical, a standard: any qualified maker Cherry CA-1015 p.27 ↗
Sources17
- Cherry Fastening Systems for Aerospace Tool Catalog (©2015 edition, archived), p.26, CherryMAX® Blind Rivets & Tools, Cherry Power Tools ↗
- H753A-456 + 680B205 on G784; H781A-456 + 680B205 on G784; H782 + 680B205 on G784: "*** Use adapter 680B205" (p.26). -4 and -5 only: CA-1015 p.5 does not shade -6 for the G784 with CherryMAX® heads, though p.26 and CA-1001 p.13 print -6; confirm with Cherry before using it at -6.
- H680B200A on G784: CA-1015 p.5 shades G784 + H680B200A for nominal and oversize -4, -5, -6; p.21: "The use of these riveters is not preferred".
- Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX® Tool Selection (shaded chart) ↗
- H701B-456 on G746A; H747-456 on G746A; H753A-456 on G746A; H781A-456 on G746A; H782 on G746A: Oversize diameters: CA-1015 p.5 shades the G746A for oversize -4 and -5 only (not -6).
- Cherry CA-1001 Tool Catalog (2017), p.22, Riveter Adapters ↗
- H701B-456 + 744-300 on G83A or G84; H747-456 + 744-300 on G83A or G84; H753A-456 + 744-300 on G83A or G84; H781A-456 + 744-300 on G83A or G84; H782 + 744-300 on G83A or G84: 744-300: G83A, G84 to the G704B (CherryMAX®) mounting system "for H701B, H747, H781A, H782, H753A"; "Must remove the bayonet adapter".
- Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX Tool Selection ↗
- Nominal and oversize diameters. G800 is hand powered. Inconel (CR3852, CR3853): Cherry's ©2015 tool guide p.26 says "G704B/G83A/G84 power riveters recommended for installation of Inconel fasteners due to high break stem loads".
- Nominal -4 to -6; oversize -4 and -5 only.
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.43, CherryMAX®, Allmax®, HuckMAX® Nose Assemblies ↗
- 456MAX-701-17 on GB704; 456MAX-704-54RA on GB704; 456MAX-704-43OS on GB704: "Pulls all 3" (1/8", 5/32", 3/16").
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.41, GB704 Nose Assembly Selection Chart ↗
- 456MAX-704-35 on GB704: GB704 chart; note 2: "installs 1/8", 5/32", and 3/16" diameters". The chart names CherryMAX®, not Allmax® or HuckMAX®.
- Cherry CA-1015 (CherryMAX process manual), "NAS vs. CherryMAX® Cross-Reference List", p.27 ↗
- Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.80, Model 2013, Standard Inline & Offset Nose Assemblies ↗
- 99-3442 on Model 2013; 99-3443 on Model 2013; 99-1333 on Model 2013; 99-1334 on Model 2013; 99-1335 on Model 2013; 99-1336 on Model 2013: Model 2013, Standard Inline & Offset Nose Assemblies (1/8", 5/32" and 3/16" columns).
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.156, Other - Gage Bilt Cross Reference, page 51 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.153, Other - Gage Bilt Cross Reference, page 48 ↗
- Cherry CA-1001 Tool Catalog (2017), p.7, G83A Description ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.154, Other - Gage Bilt Cross Reference, page 49 ↗
- Cherry CA-1001 Tool Catalog (2017), p.7, G84 Description ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.155, Other - Gage Bilt Cross Reference, page 50 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.142, Other - Gage Bilt Cross Reference, page 37 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.149, Other - Gage Bilt Cross Reference, page 44 ↗
- Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.106, Other - Gage Bilt Cross Reference, page 1 ↗
Not documented
- Huck tooling for the Cherry part number itself is not documented: Huck's catalog names HuckMAX™ and HUCK-CLINCH® bases, not CR numbers. See the equivalents below.
Diameter -5 (5/32"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Install tooling
Install tooling: G747, G704B or G800 (Cherry CA-1015 (CherryMAX process manual), p.5, CherryMAX Tool Selection)
Decode details
| Series | CherryMAX |
|---|---|
| Decode confidence | high |
| Numbering source | Cherry CA-1011 p.5, numbering system |
- CherryMAX: CR3 + rivet type & material combination + head style digit + diameter in 32nds + maximum grip length in 16ths (CA-1011 p.5).
- Head and materials from the catalog table for this base part number.
Government reference cross-reference (DLA FLIS)
CR3252-5-12 is not listed in FLIS under this exact part number (FLIS data as of 2025-03-18, March 2025 snapshot). FLIS may record it with a material or finish code, or under the standard part number.
Source: DLA PUB LOG ↗. Search any part number in the decoder.
- CherryMAX by Cherry, blind rivet
- Datasheet (PDF) ↗
- Manufacturer page ↗
- Numbering: Cherry CA-1011 p.5, numbering system ↗
- Geometry: CA-1011 ↗
Family-level estimate, not specific to CR3252-5-12: Low (SpecLok sourcing assessment; no DLA lead time or stock on file for this part number)
Supply signal
Supply signalfor this part number
- Not listed in FLIS under this exact part number (March 2025 snapshot).
- No SpecLok quotes yet.
A signal from records SpecLok holds, not availability, stock or a lead-time promise. FLIS lists who has recorded a part number for the item, not who makes it today. DoD awards carry no NSN or part number, so award activity is for the item name's class.
Sources: DLA FLIS Data Electronic Reading Room (PUB LOG) ↗, DLA PUB LOG ↗, USAspending.gov award search API ↗; DoD award data 2025-10-01 to 2026-07-06; compiled 2026-10-02.
Image credits: Cherry Aerospace, CherryMAX® Rivet catalog CA-1011, p.1 ↗. Product images belong to their manufacturers.
Sources
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
CherryMAX family page →Decode another part number →Not sure this is the right fastener? Use the selector →