Click Bond adhesive-bonded studs, standoffs and nutplates, Click Bond
CB4000C4CRA8
Bond a stud, standoff or nutplate to the surface: no rivet holes, and no hole at all for studs and standoffs.
- Style Stud, adhesive bonded
- Thread thread .2500-28 (4)
- Stud length length .500" (8)
- Material Baseplate C: Carbon/Epoxy, 350°F C…
- Lead-time risk Medium
| Family | Click Bond adhesive-bonded studs, standoffs and nutplates (Click Bond) |
|---|---|
| Style | Stud, adhesive bonded (source: Click Bond Product Guide, p.12, Studs) |
| Thread | thread .2500-28 (4) |
| Stud length | length .500" (8) |
| Material | Baseplate C: Carbon/Epoxy, 350°F Cure; stud/standoff CRA: A-286/302/303/304/316 CRES Passivated |
Decoded from the published numbering scheme; not a claim that this exact part number is a stocked SKU, and not a certified design authority. Always verify against the controlling drawing and spec.
Series and loads (datasheet)
CB[basic][baseplate][thread][stud material][length]… · e.g. CB4001 G 3 CRA 12 H P 750 (Product Guide p.10) · nutplates e.g. CB6009 CR 3 CRS 1 P NL (p.4)
No push-off, torque-out or tensile values for the aerospace studs, standoffs or nutplates are published in the free documents. Nutplates: "All Click Bond nutplates conform to the performance requirements of NASM25027" (Product Guide p.2); CB6009 drawing: "NUTPLATE MEETS THE STRENGTH AND REUSABILITY REQUIREMENTS OF NASM25027." Adhesive CB200: shear 4400 psi (ASTM D1002), peel 21 pli (ASTM D1876), service -67°F to 250°F (Product Guide p.43).
Other CB4000 part numbers
Adhesive-bonded · 4 steps
1/4Adhesive on the base
“Apply the mixed adhesive as a built-up spot to the center of the stud, standoff, or cable tie mount baseplate bonding area as indicated in Figure 5.”
Click Bond CBPS-206 Rev. 7 (adhesive bonding process spec), p.8, §2.6.1.3 ↗
Drawing traced from: Fig. 4, the stud held clear of the substrate with adhesive on its base.
Source images (4): patent and government drawings
A patent drawing shows the patented design, which can differ in detail from today's catalog part. Each image says why it is tied to this family.
Install tooling: Click Bond adhesive and the disposable installation fixture (CBPS-206)
Decode details
| Series | Click Bond CB4000 |
|---|---|
| Decode confidence | high |
| Numbering source | Click Bond Product Guide, How Our Part Numbers Work (p.4, p.10) |
Lead-time risk for this family (SpecLok sourcing assessment): Medium
Image credits: Click Bond, Inc., Adhesive Bonded Studs & Standoffs product page ↗. Product images belong to their manufacturers.
Sources
Next · Quote
Your quote
Get quotes above adds this part and its install tooling. The quote screen takes your email, need-by and certs.