Click Bond adhesive-bonded studs, standoffs and nutplates tooling, gauges and removal
Click Bond · Adhesive-bonded fastener · Family page · Shop verification card · Get quotes for this tooling
By diameter
| Sizes | Published tool | Source |
|---|---|---|
| Click Bond adhesive and the disposable installation fixture (CBPS-206) | ||
Tools, heads, adapters and gaugesCited tables
Click Bond parts install with an adhesive and the disposable fixture, not a tool; CBPS-206 lists several adhesives without assigning one per part number, so no single tool line is written.
Accessorys
Pressure Application Fixture (PAF)
Click Bond Pressure Application Fixture, standard fixture
"The over-center action of the fixture squeezes out the adhesive and holds the fastener in place while the adhesive cures." "After the adhesive has cured, remove the fixture by grasping with pliers and pulling it off the substrate. Discard the fixture."
Click Bond CBPS-206 Rev. 7 (adhesive bonding process spec), p.8, §2.6.1.4 to 2.6.1.7, Figure 5 ↗
Nutplate installation fixture
Integral, disposable, elastomeric installation fixture (nutplates)
"Each nutplate is furnished with an integral, disposable, elastomeric installation fixture to align and hold the nutplate to the surface and keep adhesive out of the hole and threads."
Click Bond CBPS-206 Rev. 7 (adhesive bonding process spec), p.10, §2.6.3.1.3 ↗
CB200-40
CB200 acrylic structural adhesive, cartridge
One of the CBPS-206 §2.1.1 adhesives; the process spec does not pick one per part.
Click Bond CBPS-206 Rev. 7 (adhesive bonding process spec), p.1-2, §2.1.1 Adhesives ↗
CB420-50E
CB420 acrylic structural adhesive, cartridge
One of the CBPS-206 §2.1.1 adhesives; the process spec does not pick one per part.
Click Bond CBPS-206 Rev. 7 (adhesive bonding process spec), p.1-2, §2.1.1 Adhesives ↗
CB394-43
CB394 high temperature epoxy structural adhesive
One of the CBPS-206 §2.1.1 adhesives; the process spec does not pick one per part.
Click Bond CBPS-206 Rev. 7 (adhesive bonding process spec), p.1-2, §2.1.1 Adhesives ↗
CB359-50
CB359 epoxy structural adhesive (Hysol® EA 9359.3)
One of the CBPS-206 §2.1.1 adhesives; the process spec does not pick one per part.
Click Bond CBPS-206 Rev. 7 (adhesive bonding process spec), p.1-2, §2.1.1 Adhesives ↗
Tooling source notes
- CBPS-206 §3.1.5: "Click Bond, Inc. offers proof load test tools for bonded fasteners. Consult your local sales engineer for guidance".Manufacturer document, not interview: Click Bond CBPS-206 Rev. 7.
Removal (drill-out)None published
No published removal procedure found; follow the manufacturer's instructions. Manufacturer page ↗
Sources
Tool tables are the manufacturer's as published in the cited revision; confirm current tool PNs with the manufacturer before purchase. Not a certified process authority: install and remove per the OEM process specification.
Next · Quote
Put the tooling on the RFQ
Your quote adds these tools and gauges for the diameters on your lines. Get quotes: SpecLok sources this from authorized distributors and returns price, lead time and certs.