Click Bond adhesive-bonded studs, standoffs and nutplates, Click Bond
CB4000C3CRA16
Bond a stud, standoff or nutplate to the surface: no rivet holes, and no hole at all for studs and standoffs.

- Style Stud, adhesive bonded
- Thread thread .1900-32 (3)
- Stud length length 1.000" (16)
- Material Baseplate C: Carbon/Epoxy, 350°F C…
| Family | Click Bond adhesive-bonded studs, standoffs and nutplates (Click Bond) |
|---|---|
| Style | Stud, adhesive bonded (source: Click Bond Product Guide, p.12, Studs) |
| Thread | thread .1900-32 (3) |
| Stud length | length 1.000" (16) |
| Material | Baseplate C: Carbon/Epoxy, 350°F Cure; stud/standoff CRA: A-286/302/303/304/316 CRES Passivated |
Decoded from the published numbering scheme; not a claim that this exact part number is a stocked SKU.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Series and loads (datasheet)
CB[basic][baseplate][thread][stud material][length]… · e.g. CB4001 G 3 CRA 12 H P 750 (Product Guide p.10) · nutplates e.g. CB6009 CR 3 CRS 1 P NL (p.4)
No push-off, torque-out or tensile values for the aerospace studs, standoffs or nutplates are published in the free documents. Nutplates: "All Click Bond nutplates conform to the performance requirements of NASM25027" (Product Guide p.2); CB6009 drawing: "NUTPLATE MEETS THE STRENGTH AND REUSABILITY REQUIREMENTS OF NASM25027." Adhesive CB200: shear 4400 psi (ASTM D1002), peel 21 pli (ASTM D1876), service -67°F to 250°F (Product Guide p.43).
Other CB4000 part numbers
Adhesive-bonded · 4 steps
1/4Adhesive on the base
“Apply the mixed adhesive as a built-up spot to the center of the stud, standoff, or cable tie mount baseplate bonding area as indicated in Figure 5.”
Click Bond CBPS-206 Rev. 7 (adhesive bonding process spec), p.8, §2.6.1.3 ↗
Drawing traced from: Fig. 4, the stud held clear of the substrate with adhesive on its base.
Source images (4): patent and government drawings
A patent drawing shows the patented design, which can differ in detail from today's catalog part. Each image says why it is tied to this family.




Install tooling: Click Bond adhesive and the disposable installation fixture (CBPS-206)
Required tooling, every brand
CB4000C3CRA16: no tool catalog or process document on file names tooling for this part number. Not documented is not the same as none existing.
Click Bond adhesive-bonded studs, standoffs and nutplates tool tables
Sources0
Not documented
- Click Bond parts install with an adhesive and the disposable fixture, not a tool; CBPS-206 lists several adhesives without assigning one per part number, so no single tool line is written.
- No tool catalog or process document on file names tooling for CB4000C3CRA16.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Decode details
| Series | Click Bond CB4000 |
|---|---|
| Decode confidence | high |
| Numbering source | Click Bond Product Guide, How Our Part Numbers Work (p.4, p.10) |
Family-level estimate, not specific to CB4000C3CRA16: Medium (SpecLok sourcing assessment; no DLA lead time or stock on file for this part number)
Image credits: Click Bond, Inc., Adhesive Bonded Studs & Standoffs product page ↗. Product images belong to their manufacturers.
Sources
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Click Bond adhesive-bonded studs, standoffs and nutplates family page →Cross-reference this part number →Decode another part number →