Cross reference · Fastener Innovation Technology · Pin-rivet

FIT7953 cross reference: Hi-Shear HST529DL, Huck HK0097

FIT7953 is a Fastener pin-rivet series on 5 government stock numbers. It is cross-referenced to Hi-Shear HST529DL, Huck HK0097. Each one is labeled with how strong the evidence is.

FIT7953

What it is
Pin-rivet, Fastener series, on 5 government stock numbers
Equivalents
  • HST529DLHi-ShearCatalog onlyGovernment catalog: on 4 of 5 stock numbers. Confirm on the drawing.
  • HK0097HuckCatalog onlyGovernment catalog: on 3 of 5 stock numbers. Confirm on the drawing.
Install tooling, by who made the part
Not documented for this part number. Ask a tooling specialist →

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Reference only: the drawing and its process spec govern. How to read this

Series in the government catalog

5 stock numbers

Catalog-only listings need engineering approval before you substitute.

Manufacturers

  • HST529DLHi-ShearCatalog only, needs approvalon 4 of 5 stock numbers, 4 sizes
  • HK0097HuckCatalog only, needs approvalon 3 of 5 stock numbers, 3 sizes
4 more on one stock number each: HK0097C, HST529AP, VS3437DC, VS3437VAP
  • HK0097CHuckCatalog only, needs approvalon 1 of 5 stock numbers
  • HST529APHi-ShearCatalog only, needs approvalon 1 of 5 stock numbers
  • VS3437DCHowmet Fastening SystemsCatalog only, needs approvalon 1 of 5 stock numbers
  • VS3437VAPHowmet Fastening SystemsCatalog only, needs approvalon 1 of 5 stock numbers

Airframer and OEM drawings

    1 more on one stock number each: 3D0097C
    • 3D0097CBoeingCatalog only, needs approvalon 1 of 5 stock numbers

    Plus 2 reference numbers whose issuer SpecLok does not identify (distributors and catalog agencies are not named).

    Get quotes for FIT7953

    Cited equivalents go on the request as acceptable alternates. Catalog-only listings do not.

    Install tooling, by who made the part

    Not documented for FIT7953: no tool catalog or process document on file names its tooling.

    The nose and tool follow who made the part, not the stock number: an equivalent fastener does not make another maker's noses interchangeable. Check the maker on the CoC or packaging, then use part number to tool.

    Sizes by maker

    5 stock numbers
    Part numbers DLA FLIS lists for FIT7953 and the series cross-referenced to it, by stock number
    NSNFIT7953HST529DLHK0097VS3437DC3D0097CDLA median, 12 mo
    5320-01-391-2310FIT7953-6-5HST529DL-6-5HK0097-6-5
    5320-01-588-7021FIT7953-6-213D0097C6-21
    5320-01-391-3646FIT7953-8-11HST529DL-8-11
    5320-01-391-3650FIT7953-8-13HST529DL-8-13HK0097-8-13
    5320-01-391-3652FIT7953-8-21HST529DL-8-21HK0097-8-21VS3437DC-8-21

    Each row is one National Stock Number and the part numbers DLA FLIS lists on it, as written there. A blank means FLIS lists no part in that series on the stock number, not that the size does not exist.

    Sources and how to read this page.Details

    Reference numbers the Federal Logistics Information System records against the same National Stock Number. A supply-catalog cross-reference, not an engineering-approved interchangeability: confirm against the controlling drawing or spec before substituting. Only equivalents marked cited have a manufacturer or government document, linked with each.

    Source: DLA Federal Logistics Information System, via DLA PUB LOG ↗ (FLIS Data Electronic Reading Room ↗), data as of 2025-03-18 (March 2025 snapshot). Federal supply class 5320 Rivets. Issuer names are SpecLok's reading of the filing CAGE code; distributors are not named. Compiled 2026-10-03.

    Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

    Next step

    Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

    Look up a specific size →All cross references →