← Catalog

LISI, pin and collar

Hi-Lok

Hi-Lok pin and collar (Hi-Shear): the collar wrenching device shears off at installation.

Hi-Lok: HI-LOK™ pin (HL)
  • Shear 95 ksi
  • Access Two-sided
  • Diameters 5/32 to 3/8"
  • Materials Titanium, Alloy steel
  • Lead-time risk Low
3D view

Head style

0.063 in1.000 in
Grip 6-5 · 0.250–0.313 in
Range source

Hi-Shear HL10 Rev 40 sheet 2 · CODE note: second dash number indicates maximum grip in 1/16ths; title block 1/16 GRIP VARIATION. Bands use published limits; gaps remain visible. The near-edge check is SpecLok’s 20% threshold.

HL10-6-5 / HL70-6

HL10-6-5 page
Component model, not manufacturer CAD. Details
Estimated threads

Printed pitch and TD major diameter; right-hand single-start 60° profile. Profile, class fit and termination are estimated; some surfaces are faceted. Material basis applies to catalog dimensions, not thread tolerances. Not a verified AS8879 UNJ profile.

Pin: 10-32UNJF-3A Modified

Collar: 10-32UNJF-3B

Two-sided, pin and collar (threaded): “Manually thread the collar onto the pin.” (Hi-Shear Hi-Lok and Hi-Lok/Hi-Tigue Installation Instructions, p.10, I.1 b)

Shear
95 ksi
Blind bulb
n/a
Install
Both sides needed
Diameters
5/32, 3/16, 1/4, 5/16, 3/8"
Lead-time risk (SpecLok assessment)
Low

Typical applications

  • ·Pin-and-collar structural joints with two-side access

Strengths

  • +"Collar wrenching device automatically shears off" (HL10 drawing)
  • +Howmet: "eliminates the need for torque inspection"

Trade-offs

  • −Needs access to both sides (pin and collar)
  • −MIL-STD-889C: alloy steel is incompatible with graphite; titanium is compatible except in sea water

Also called HiLok, Hi Lok, pin and collar. P/N: HL10 / HL18 protruding shear head · HL11 / HL19 100° flush shear head · typical collars HL70, HL79, HL82, HL94, HL97

Next step

On the floor:Hi-Lok collar removal: tools and methodHi-Lok collar identification: colour, material and marksIdentify an aerospace fastener from its head and tail

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers