← Catalog

Monogram, blind bolt

Composi-Lok II

Monogram Composi-Lok II: "high strength blind bolt for composite and metallic materials" (catalog).

Composi-Lok II: Composi-Lok II®: High strength blind bolt for composite and metallic materials.
  • Shear 75 ksi
  • Access Blind (one-sided)
  • Diameters 5/32 to 3/8"
  • Materials Titanium, A286 CRES
  • Lead-time risk High
Composite-optimized
3D view

Head style

Series (drawing)

0.050 in1.700 in
Grip 6-250 · 0.200–0.250 in
Range source

MBF2110 Rev AB sheet 2 · Table IV. Bands use published limits; gaps remain visible. The near-edge check is SpecLok’s 20% threshold.

MBF2110-6-250

Part number page
Component model, not manufacturer CAD. Details
Estimated threads

Right-hand, single-start 60° threads. Pitch is estimated from the closest Unified fine size; major diameter is scaled from Monogram’s figure. Profile, fit and termination are estimates; some surfaces are faceted. Material basis applies to catalog dimensions, not thread tolerances. Not manufacturer specifications.

Generic UNF pitch reference · Tungaloy

Blind (one-sided), threaded blind bolt: “The wrenching part of the adapter assembly is inserted over the slabbed portion of the screw and the nose piece engages the drive-nut.” (Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.17)

Shear
75 ksi
Blind bulb
large
Install
One-side install
Diameters
5/32, 3/16, 1/4, 5/16, 3/8"
Lead-time risk (SpecLok assessment)
High

Typical applications

  • ·Composite and metallic structure (Monogram catalog: "for composite and metallic materials")
  • ·Blind attachments to composite substructure (MIL-HDBK-17-3F C-32: large blind-side footprint, Ti or A286)

Strengths

  • +Large blind side upset (Monogram catalog)
  • +Controlled clamp-up: 560 lb min preload at 3/16" (40% of min UTS, catalog chart)
  • +Approved on virtually all composite airframe programs (Monogram catalog)

Trade-offs

  • −Monogram installation tooling (MBF2003 §3)

Also called Composilok, Composi-Lok 3, MBF series. P/N: MBF2110 · MBF2111 · MBF2112 · MBF2113 · MBF2120 · MBF2121 · e.g. MBF2112-6-500

Next step

On the floor:Identify an aerospace fastener from its head and tail

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers