◈SpecLok
  • Part number
  • Find a tool
  • Get quotes
  • Learn
More ▾

Learn

  • How specialty fasteners work
  • Explore fasteners
  • Catalog
  • AN / MS / NAS hardware
  • 3D model library
  • Compare side by side
  • Installation tooling guide
  • Design calculators
  • All articles

Select

  • Joint selector
  • Part-number decoder
  • Part-number cross reference
  • Which tool installs this part
  • Part-number index
  • Grip length planner
  • Hole schedule & grip review
  • BOM decoder

Quote and procure

  • Your quote
  • Request a tool: buy, rent or repair
  • Installation tooling
  • Preview the RFQ document
  • Your quote requests
  • Inventory and certs
  • The sourcing reality

Learn

  • How specialty fasteners work
  • Explore fasteners
  • Catalog
  • AN / MS / NAS hardware
  • 3D model library
  • Compare side by side
  • Installation tooling guide
  • Design calculators
  • All articles

Select

  • Joint selector
  • Part-number decoder
  • Part-number cross reference
  • Which tool installs this part
  • Part-number index
  • Grip length planner
  • Hole schedule & grip review
  • BOM decoder

Quote and procure

  • Your quote
  • Request a tool: buy, rent or repair
  • Installation tooling
  • Preview the RFQ document
  • Your quote requests
  • Inventory and certs
  • The sourcing reality

Aerospace Fasteners

SpecLok · a fastener-selection aid, not a certified design authority. Always verify against the controlling spec, OEM process, and your stress group.

Collects anonymous usage data to improve selection and sourcing. No personal info unless you add an email to a quote request.

Your account

← Composi-Lok II

Shop verification card

Composi-Lok II

Monogram · Blind bolt · MBF2110 · MBF2111 · MBF2112 · MBF2113 · MBF2120 · MBF2121 · e.g. MBF2112-6-500

speclok.com
11/16/2026

Install sequence

  1. 1. Inserted

  2. 2. Tool engaged

  3. 3. Screw turned, sleeve drawn over the nut

  4. 4. Head formed, pintail and drive-nut ejected

Traced from Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.18, Figure 15. Not to scale.

Before you install

  • Diameters offered: 5/32, 3/16, 1/4, 5/16, 3/8"
  • Tool: Monogram pneumatic and hand installation tools (MBF2003 §3, Figures 1-7, e.g. MP550BF pneumatic pistol)
  • Proprietary system required.
  • Training: Not stated in the cited documents.
  • Lead-time risk: High

Installed preload

  • Composi-Lok II 3/16" (MBF2112-06-500), preload: 560 minimum required (40% of min UTS) · 1,000 typical, pounds (Monogram catalog comparison chart)
  • Composi-Lok 3 3/16" (MBF2312-06-500), preload: 560 minimum required (40% of min UTS); typical "anticipated to be equal to those of Composi-Lok II" (catalog chart, note 2)

MBF2003 publishes no preload figure. It offers an optional indirect check: "If desired, clamp-up may be determined indirectly be seating torque"; resisting rotation at the Table 12 values (-5: 4 to -12: 30 in.-lb minimum, counter-clockwise, via the MHTFDN torque adaptor) "is a good indication that the required preload has been imparted to the joint" (MBF2003 §10.2). "Care should be taken not to exceed the seating torque."

Gauge kit (published part numbers)

GaugeSizesChecks / limitsSource
BFS-1AallComposi-Lok grip gage and grip scale slide, assembly (grip gage BFS-1, grip scale slide GSS-1)Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.16, §6.1, Figure 12
MGFCL-5-5Flush head barrel gage · +0.103 / -0.000Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.20, Table 13
MGFCL-6-6Flush head barrel gage · +0.103 / -0.000Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.20, Table 13
MGFCL-7-7Flush head barrel gage · +0.103 / -0.000Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.20, Table 13
MGFCL-8-8Flush head barrel gage · +0.103 / -0.000Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.20, Table 13
MGFCL-9-9Flush head barrel gage · +0.103 / -0.000Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.20, Table 13
MGFCL-10-10Flush head barrel gage · +0.103 / -0.000Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.20, Table 13
MGFCL-11-11Flush head barrel gage · +0.103 / -0.000Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.20, Table 13
MGFCL-12-12Flush head barrel gage · +0.103 / -0.000Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.20, Table 13
MGPCLallProtruding head leaf gage · +0.103 / -0.000Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.20, Table 13
MHTFDN-5-5Torque adaptor, seating torque checkMonogram MBF2003 Rev AG (Composi-Lok II install spec), p.19, §10.2, Table 12
MHTFDN-6-6Torque adaptor, seating torque checkMonogram MBF2003 Rev AG (Composi-Lok II install spec), p.19, §10.2, Table 12
MHTFDN-7-7Torque adaptor, seating torque checkMonogram MBF2003 Rev AG (Composi-Lok II install spec), p.19, §10.2, Table 12
MHTFDN-8-8Torque adaptor, seating torque checkMonogram MBF2003 Rev AG (Composi-Lok II install spec), p.19, §10.2, Table 12
MHTFDN-9-9Torque adaptor, seating torque checkMonogram MBF2003 Rev AG (Composi-Lok II install spec), p.19, §10.2, Table 12
MHTFDN-10-10Torque adaptor, seating torque checkMonogram MBF2003 Rev AG (Composi-Lok II install spec), p.19, §10.2, Table 12
MHTFDN-11-11Torque adaptor, seating torque checkMonogram MBF2003 Rev AG (Composi-Lok II install spec), p.19, §10.2, Table 12
MHTFDN-12-12Torque adaptor, seating torque checkMonogram MBF2003 Rev AG (Composi-Lok II install spec), p.19, §10.2, Table 12

Removal

Published: Monogram MBF2003 Rev AG (Composi-Lok II), §8 Removal and Figure 9. If a fastener has been removed, the same diameter Composi-Lok II can be reinstalled provided the hole has not been damaged. In the event that the hole has been damaged, the next larger diameter Composi-Lok II should be used (NOTE: for flush head fasteners the countersink will have to be deepened). Steps: speclok.com/tooling/composi-lok#removal

Accept / reject after install

  • "The stem break-off position of the screw in the head of the nut is a positive indication that the fastener has been properly installed (provided that the correct grip length has been used)" (MBF2003 §10.1). Corebolt break-off limits +0.103"/-0.000", measured from the skin surface on protruding head fasteners and from the head of the fastener on flush style fasteners (MBF2003 Table 11 note 4); "Product drawings list the acceptable stem break-off limits" (§10.1).
  • Break-off out of limits "may indicate the use of the wrong grip fastener or other problem. In either case, the fastener should be removed, the grip length carefully check, and then replaced by the correct grip fastener, as necessary" (MBF2003 §10.1).
  • Optional seating-torque check ("if desired"): the fastener resists counter-clockwise rotation at the Table 12 minimum for its size, -6: 6 in.-lb (MBF2003 §10.2).
  • Composi-Lok 3 differs: it "is designed to provide a flush break throughout the fastener's grip accommodation. For this reason the stem break-off position of the screw in the head of the nut is NOT an indicator that the fastener has been properly installed" (MBF2301 §9.1). Break-off limits +.000/-.030 for -5 and -6, larger sizes T.B.D. (MBF2301 Table 11). Optional seating torque 25 in.-lb minimum (-5 to -7), 50 (-8 to -12) (MBF2301 Table 12).
  • "The corebolt protrusion may be shaved flush with the sheet surface using a standard rivet shaver equipped with a carbide cutter" at "approximately 10,000 RPM" (MBF2003 §9.1).

Check gauges

  • Flush head barrel gage MGFCL-5 through MGFCL-12 (MBF 2112, 2113, 2122, 2123); protruding head leaf gage MGPCL (MBF 2110, 2111, 2120, 2121) (MBF2003 Table 13). Gage prongs straddle the screw: high break-off check, gage must not rock; low break-off check, gage must rock (MBF2003 Figure 16).
  • Composi-Lok grip gage BFS-1 and grip scale slide GSS-1, available as an assembly, BFS-1A (MBF2003 Figure 12). Measures grip before installation: "the grip length should be checked with a grip gauge" (§6.1).
  • Torque adaptor MHTFDN -5 through -12 for the seating torque check (MBF2003 Table 12).

Sources: MBF2003 installation spec · Monogram catalog (preload chart) · MBF2301 (Composi-Lok 3). Acceptance limits belong to the controlling spec: verify against your program's process documentation before use on hardware.

Sources

3
  1. Monogram MBF2003 (Composi-Lok II install & inspection spec)
  2. Monogram catalog (preload chart)
  3. MBF2301 (Composi-Lok 3)

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers