← Tooling compatibility finder
NASS05-2581-23
NASS05-2581-23 (nose assembly) · Nose / pulling head · Gage Bilt · Standard
No fastener installation table on file names this part number.
Catalog noteDetails
Other brands' equivalents1 statement
- Gage Bilt says NASS05-2581-23 replaces 99-2552S (Huck) Gage Bilt 2017 p.146 ↗
Gage Bilt's cross-reference lists NASS05-2581-23 (nose assembly) for 99-2552S. Gage Bilt's GB731NASK chart (PDF p.57) gives 5/32" shear lockbolts NASS05 noses and 5/32" tension lockbolts NAST05 noses.
Sources1
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions1 · for envelope CAD
| Feature | Value | As printed | Source |
|---|---|---|---|
| Length from tool face | 2.3 in | NASS05-2581-23 ("-23" = 2.3 in. per the PN rule) "The last 2 digits of the nose assembly represents the length the nose extends from the tool i.e. -20 = 2.0 inches" (GB704 chart, PDF p.41). | Gage Bilt Aerospace Catalog 2017 (archived; pages are PDF pages), p.146, Other - Gage Bilt Cross Reference, page 41 ↗ |
Only dimensions a document prints are listed, with the feature each one measures. None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next · 3 Quote
Put the tool on the quote
Add to quote puts this PN on the one quote with its citation. Tooling needs no lot traceability.