← Tooling compatibility finder
NAS06-206G-25OS
NAS06-206G-25OS (nose assembly - offset) · Nose / pulling head · Gage Bilt · Offset
No fastener installation table on file names this part number.
Catalog noteDetails
3D model not available: dimensions not published. 3D library
Other brands' equivalents1 statement
- Gage Bilt says NAS06-206G-25OS replaces 99-3704 (Huck) Gage Bilt 2017 p.149 ↗
Gage Bilt's cross-reference lists NAS06-206G-25OS (nose assembly - offset) for 99-3704.
Sources1
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions0 · for envelope CAD
No dimensions are printed for this item in the catalogs on file.
Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
On the floor:Low clearance puller finder
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.