Composi-Lok II, Monogram
MBF3003-10-450
Monogram Composi-Lok II: "high strength blind bolt for composite and metallic materials" (catalog).

- Head Low profile protruding head
- Diameter 5/16" (-10)
- Grip .400-.450"
- Material Titanium
- Lead-time risk (DLA) Medium
MBF3003-10-450
- What it is
- Composi-Lok II (Monogram), Low profile protruding head, 5/16" (-10) diameter, max grip .450" (grip range .400-.450", MBF3003 Rev V grip table)
- Equivalents
- No equivalent on file: no maker document names one and the government catalog lists none on its stock number.
- Install tooling, by who made the part
- Composi-Lok II: MP550BFDN-10AA (complete tool)
The nose follows the maker, not the stock number: check the maker on the CoC or packaging.
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Reference only: the drawing and its process spec govern. How to read this
Install tool MP550BFDN-10AA, proprietary · Exact nose, every brand · Variable stack? Plan grips
What the government paid12 months to 2026-09-15: median $1,769.74 ea, range $1,650.00 to $1,889.47 (2 awards); production lead 101 days
12 months to 2026-09-15: median $1,769.74 ea, range $1,650.00 to $1,889.47 (2 awards)
1 unusual award in the window left out, marked below.
| Award date | Qty | Each | CAGE | PN on award |
|---|---|---|---|---|
| 2026-06-12 | 1 | $254.13unusual award, check | 78286 | MBF3003-10-450 |
| 2026-06-04 | 2 | $1,650.00 | 745V4 | MBF3003-10-450 |
| 2025-12-15 | 5 | $1,889.47 | 0F4K9 | MBF3003-10-450 |
Median by year, unusual awards left out: 2026 $1,650.00 ea (1 award) · 2025 $1,889.47 ea (1 award)
- DLA lead time: production 101 days, administrative 95 days (snapshot 2026-09-16).
DLA prices at DLA quantities, not a quote.Source
DLA award prices at DLA quantities and terms, not a commercial quote. Each award may bundle packaging, delivery and inspection terms that a commercial buy does not. Vendors are shown by CAGE code only.
The 12-month window is 2025-09-16 to 2026-09-15: it ends at the latest award date in the loaded files. Medians and ranges are per unit of issue; awards in different units are never mixed. An award more than 3 times above or below the median is marked "unusual award, check" and left out of the median, the range and the yearly medians; it is shown as DLA published it. The median it is judged against is the window's, or every loaded award's when the window has fewer than 3 awards; with fewer than 3 awards in total nothing is judged. Lines of one purchase order at the same date, price and CAGE count as one award. When no usable award falls in the window, the 12 months before the latest usable award are shown, labeled as older. Lead times are whole days in a three-digit field, so 999 means 999 or more, or a placeholder.
Joined through the NSN that DLA FLIS records for this part number. A part number on an award is the one cited on that award line; the same NSN can be bought under several part numbers. Awards loaded: 2023-01-03 to 2026-09-15.
Source: DLA FOIA Electronic Reading Room ↗, public FOIA releases. Files:
- 2023ContHist.zip/2023ContractHistory.txt (Contract History, snapshot 2024-06-24)
- 2024ContHist.zip/2024ContractHistory.txt (Contract History, snapshot 2025-08-07)
- contracthist2025.zip/contracthist2025.txt (Contract History, snapshot 2026-04-07)
- 2026-09-16-1038_contracthist.zip/2026-09-16-1038_contracthist.txt (Contract History, snapshot 2026-09-16)
- 2026-09-16-1038_ALTPLT.zip/2026-09-16-1038_ALTPLT.txt (ALT/PLT lead times, snapshot 2026-09-16)
- 2026-09-16-1038_OHandBO.zip/2026-09-16-1038_OHandBO_SEP2026.txt (On hand and backorder, snapshot 2026-09-16)
Compiled 2026-10-02.
CAD for MBF3003-10-450
Estimated threads
Right-hand, single-start 60° threads. Pitch is estimated from the closest Unified fine size; major diameter is scaled from Monogram’s figure. Profile, fit and termination are estimates; some surfaces are faceted. Material basis applies to catalog dimensions, not thread tolerances. Not manufacturer specifications.
Generic UNF pitch reference · Tungaloy| Family | Composi-Lok II (Monogram) |
|---|---|
| Head style | Low profile protruding head (source: Monogram drawing MBF3003 Rev V, title block, Tables I, II, note 4, material notes) |
| Nominal diameter | 5/16" (-10) |
| Grip | max grip .450" (grip range .400-.450", MBF3003 Rev V grip table) |
| Material | Titanium. Nut: 6Al-4V titanium alloy; screw: A286 CRES; sleeve: 304 stainless steel |
Decoded from the published numbering scheme; not a claim that this exact dash number is a stocked SKU.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Dimensions
| A | Head diameter | .635/.615 |
| D | Nut shank diameter | .3115/.3095 |
| G | Max grip + G: datum to the end of the nut shank | .073(ref) |
| H | Head height | .105/.098 |
| L | Max grip + L: datum to the end of the screw | .912(ref) |
| Recom. Hole | Drilled hole | .315/.312 |
All dimensions (20)Fewer dimensions
| E | SLEEVE and SCREW head diameter (2X) | .3110max |
| F | SCREW wrench flats, on the tail | .152/.147 |
| R | NUT head-to-shank radius | .040/.025 |
| T | DRIVE NUT hex across flats | .500(ref) |
| Z | Height of the cylindrical head edge | .045max |
| Min Avail. Grip | Min available grip dash | -150 |
| J | Installed blind head diameter | .475min |
| K | Installed: blind side protrusion | .540max |
| Break-Off | Screw break-off, measured from the skin surface | +.103/-.000 |
| Tensile | Tensile structural failure, min (lbs) | 3600min, lbs |
| Double Shear | Double shear, min (lbs) | 11350min, lbs |
| Locking Torque | Locking torque, min (in-lbs) | 3.5min, in-lbs |
| P | SCREW tail end to the head top, as supplied | 1.050max |
| Grip limits | Dash 10-450 | .400-.450 |
As printed on MBF3003 Rev V sheet 1 ↗. Letters match the drawing.
Some features are scaled from the figure, not dimensioned.Scaled features
Scaled from the drawing's figure (not drawing dimensions)
| Component / feature | Scaled as | Model (in) |
|---|---|---|
| NUTnut nose diameter at its end (diameter) | 0.768 x D | .2384 |
| NUTnut nose end, from the datum | 0.162 x L - G | -.6589 |
| NUTnut bore = screw thread crest diameter (diameter) | 0.713 x D | .2214 |
| SCREWscrew thread crest diameter | 0.713 x D | .2214 |
| SLEEVEsleeve bore over the nut nose and the insert (diameter) | 0.839 x D | .2604 |
| SLEEVEsleeve bore beyond the insert (diameter) | 0.729 x D | .2264 |
| INSERTinsert outside diameter (= sleeve bore) | 0.839 x D | .2604 |
| INSERTinsert inside diameter (= sleeve bore beyond the insert) | 0.729 x D | .2264 |
| INSERTinsert end, from the datum | 0.368 x L - G | -.8314 |
| SLEEVEcrimp line (start of the crimped band), from the datum | 0.724 x L - G | -1.1301 |
| SCREWscrew head top (sleeve end), from the datum | 0.826 x L - G | -1.2164 |
| SCREWscrew head corner radius | 0.062 x E | .0192 |
| SLEEVEsleeve top, from the datum (where the scaled nose meets the scaled sleeve bore) | 0.112 x L - G | -.6174 |
| NUTnut nose taper (included angle) | angle, as drawn | 29.7° |
| DRIVE NUTdrive nut length | 1.064 x T | .5322 |
| DRIVE NUTdrive nut bearing diameter (cone end on the head) | 0.684 x T | .3422 |
| DRIVE NUTdrive nut bearing cone (half angle from the axis) | angle, as drawn | 30.6° |
| SCREWwrench flats run: tail end to the drive nut (as drawn) | as drawn | .5178 |
| NUThead chamfer above the Z edge (angle from the axis) | angle, as drawn | 44.5° |
Measured on MBF3003 Rev V sheet 1 figure at 300 dpi and kept as a ratio to a dimension this part number prints. Figure scale 591.5 px/in, fitting row -8, taken from A and E; checked against D (+1.4%), T (+1.4%), F (+3.4%), L - G (-21.9%), P (-26.1%).
Also printed in MBF3003 Rev V for this part
| Recommended hole | .312-.315 in (MBF3003 Rev V sheet 1) |
|---|---|
| Installed blind head | J .475 in min diameter (MBF3003 Rev V sheet 1) |
| Installed protrusion | K .540 in max (TYPICAL INSTALLATION) (MBF3003 Rev V sheet 1) |
| Break-off limits | +.103 -.000 in, measured from the skin surface (MBF3003 Rev V sheet 1) |
| Tensile | 3600 lbs min (structural failure) (MBF3003 Rev V sheet 1) |
| Double shear | 11350 lbs min (MBF3003 Rev V sheet 1) |
| Locking torque | 3.5 in-lbs min (MBF3003 Rev V sheet 1) |
| Min available grip | dash -150 (MBF3003 Rev V sheet 1) |
| Material and heat treat | NUT: 6Al-4V TITANIUM ALLOY PER AMS-T-9047 STA OR AMS4928 OR AMS4967 HEAT TREATED PER AMS-H-81200 TO 95 KSI SHEAR STRENGTH MINIMUM. MAXIMUM HYDROGEN CONTENT 125 PPM. SCREW: A286 CRES PER AMS5731, AMS5732 OR AMS5737 HEAT TREATED TO 175 KSI TENSILE MINIMUM PER AMS-H-6875. SLEEVE: 304 STAINLESS STEEL PER AMS5639, FULLY ANNEALED. INSERT: ACETAL PER ASTM-D6778 DRIVE NUT: MILD STEEL (MBF3003 Rev V material and finish notes) |
| Finish | ( - ) NUT: PHOSPHATE FLOURIDE PER MONOGRAM SPECIFICATION PS741. SLEEVE AND SCREW: PASSIVATE PER AMS2700, KAL-GARD ANN-RO #1013 CONVERSION COATING OPTIONAL. INSERT: NONE DRIVE NUT: COLOR BROWN (MBF3003 Rev V material and finish notes) |
| Lubricant | DRY FILM LUBE PER THE CHEMICAL REQUIREMENTS OF AS5272 TYPE I, PARAFFIN WAX, OR CETYL ALCOHOL PER AS87132 (AS REQUIRED FOR PERFORMANCE). (MBF3003 Rev V material and finish notes) |
Series and strength (datasheet)
MBF2110 · MBF2111 · MBF2112 · MBF2113 · MBF2120 · MBF2121 · e.g. MBF2112-6-500
Rated shear 75 KSI (catalog comparison chart, MBF2112-06-500); 3/16" (-6) double shear 4,600 lb min, tensile 1,400 lb min, all materials & head styles (MBF2003 Table 10A).
Datasheet (PDF) ↗Section from Monogram drawing MBF3003 Rev V ↗ sheet 1.Drawing notes
Model: Monogram drawing MBF3003 Rev V
Envelope model, not manufacturer CAD.Model details
MBF3003-10-450, manufacturer nominal. Simplified component model from Monogram drawing MBF3003 Rev V sheet 1. Manufacturer nominal: printed values, the mean where only two limits are printed. Flush heads hold the printed head angle; the head depth is derived. Not manufacturer CAD. Verify against the current drawing before use. One named solid per component as the drawing calls them out (NUT, SCREW, SLEEVE, INSERT and, where the drawing has one, DRIVE NUT). Features the drawing shows without a dimension are scaled from its figure and listed as scaled in the STEP header; threads are estimated, not drawing dimensions. The STEP file is an assembly: each component is its own named part with its own colour. STL comes as the whole part or one component at a time. Axis +Z, head up, z = 0 at the face the head bears on. STEP is in millimetres (estimated threads); STL is written in millimetres.
Other head styles, same diameter and grip
- MBF3004-10-450 reduced protruding hex head
- MBF3005-10-450 100° flush head
- MBF2013-10-450 130° flush head
MBF3003 grip chart: 5/16" (-10)
Every catalogued max-grip dash number at this diameter. Stack thickness must fall inside the fastener's grip range: see the design calculators.
Other diameters at this grip:
Threaded / torqued · 4 steps
1/4Inserted
“Insert the fastener in the hole. The Composi-Lok® II can be inserted in a properly prepared hole without interference.”
Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.17, §7.2 ↗
Drawing traced from: Figure 15, left.
Source images (6): patent and government drawings
A patent drawing shows the patented design, which can differ in detail from today's catalog part. Each image says why it is tied to this family.






Required tooling, every brand
MBF3003-10-450 (Composi-Lok II, 5/16") installs with MP550BFDN-10AA (MP550BF with MPP-12 + MPTBF-10) Standard.
Other tools that work2 process-doc listings
As the fastener's own process document lists them
- MH75DN-10AA (MH75 with MHPDN-03 + MH-10) Standard Monogram MBF2003 Rev AG p.9 ↗
- MHC75DN-10AA (MHC75B with MHCPDN-03 + MHC-10) Close quarter Monogram MBF2003 Rev AG p.10 ↗
Sources3
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.4, Table 1 ↗
- Wrench adapter (turns screw) MPTBF-10; nose adapter (holds nut) MPP-12. A / B / C Ref. 1.48 / 1.36 / 0.75.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.9, Table 6 ↗
- Wrench adapter MH-10; nose adapter MHPDN-03. A / B Ref. 1.82 / .75.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.10, Table 7 ↗
- Wrench adapter MHC-10; nose adapter MHCPDN-03.
Diameter -10 (5/16"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Install tooling
Install tooling: MP550BFDN-10AA (Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.4, Table 1) · proprietary
- MGPCL Protruding head leaf gage (break-off check)
- RM3118-10 Removal nose piece module, flush head style
Decode details
| Series | Composi-Lok IIa |
|---|---|
| Decode confidence | high |
| Numbering source | Monogram drawing MBF3003 Rev V, title block, Tables I, II, note 4, material notes |
- Grip dash = max grip in thousandths of an inch (MBF3003 Rev V grip table).
- Diameter dash per the drawing's basic-dimensions table (e.g. -6 = 3/16").
- Suffix "A" "designates dual drive nut system for robotic installation" (MBF2112 drawing note 1); MBF2003's installation tooling "not applicable to Composi-Lok II which have an 'A' suffix" (MBF2003 §1.1).
Government reference cross-reference (DLA FLIS)
Government reference cross-reference (DLA FLIS)
Reference numbers the Federal Logistics Information System records against the same National Stock Number. A supply-catalog cross-reference, not an engineering-approved interchangeability: confirm against the controlling drawing or spec before substituting.
MBF3003-10-450 is listed under NSN 5320-01-713-7511 RIVET,BLIND
No other reference number is recorded against this NSN.
Source: DLA Federal Logistics Information System, via DLA PUB LOG ↗ (FLIS Data Electronic Reading Room ↗). FLIS data as of 2025-03-18 (March 2025 snapshot).
- Composi-Lok II by Monogram, blind bolt
- Datasheet (PDF) ↗
- Manufacturer page ↗
- Numbering: Monogram drawing MBF3003 Rev V, title block, Tables I, II, note 4, material notes ↗
- Geometry: MBF3003 Rev V ↗
Lead-time risk from DLA data: Medium (NSN 5320-01-713-7511: production lead 101 days)
High: DLA production lead time 180 days or more, or backorder above stock on hand. Medium: 90 to 179 days, or any backorder. Low: under 90 days and no backorder. DLA lead times are for DLA buys; a distributor with stock can ship sooner.
Supply signal
Supply signalfor this part number
- 1 CAGE code with a part number recorded on NSN 5320-01-713-7511 (FLIS, March 2025).
- Last DoD award for RIVET,BLIND items (FSC 5320): 2026-06-26; 3,082 awards since 2025-10-01.
- No SpecLok quotes yet.
A signal from records SpecLok holds, not availability, stock or a lead-time promise. FLIS lists who has recorded a part number for the item, not who makes it today. DoD awards carry no NSN or part number, so award activity is for the item name's class.
Sources: DLA FLIS Data Electronic Reading Room (PUB LOG) ↗, DLA PUB LOG ↗, USAspending.gov award search API ↗; DoD award data 2025-10-01 to 2026-07-06; compiled 2026-10-02.
Image credits: Monogram Aerospace Fasteners, Monogram Aerospace Fasteners catalog, p.4 ↗. Product images belong to their manufacturers.
Sources
- Monogram drawing MBF3003 Rev V, title block, Tables I, II, note 4, material notes
- Monogram MBF2003 Rev AG (Composi-Lok II install spec)
- Composi-Lok II datasheet (PDF)
- Drawing MBF2112 material notes; catalog comparison chart rates MBF2112-06-500 at 75 KSI
- Drawing MBF2120 material notes; MBF2003 Table 10A strengths apply to "all materials & head styles"
- DLA PUB LOG
- DLA FLIS Data Electronic Reading Room (PUB LOG)
- USAspending.gov award search API
- DLA FOIA Electronic Reading Room
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Composi-Lok II family page →Decode another part number →Not sure this is the right fastener? Use the selector →