Composi-Lok II, Monogram
MBF2121-7-1350
Monogram Composi-Lok II: "high strength blind bolt for composite and metallic materials" (catalog).

- Head Reduced protruding hex head
- Diameter 7/32" (-7)
- Grip 1.300-1.350"
- Material A286 CRES
MBF2121-7-1350
- What it is
- Composi-Lok II (Monogram), Reduced protruding hex head, 7/32" (-7) diameter, max grip 1.350" (grip range 1.300-1.350", MBF2121 Rev U grip table)
- Equivalents
- No equivalent on file: no maker document names one and the government catalog lists none on its stock number.
- Install tooling, by who made the part
- Composi-Lok II: MP550BFDN-7AA (complete tool)
The nose follows the maker, not the stock number: check the maker on the CoC or packaging.
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Reference only: the drawing and its process spec govern. How to read this
Install tool MP550BFDN-7AA, proprietary · Exact nose, every brand · Variable stack? Plan grips
CAD for MBF2121-7-1350
Estimated threads
Right-hand, single-start 60° threads. Pitch is estimated from the closest Unified fine size; major diameter is scaled from Monogram’s figure. Profile, fit and termination are estimates; some surfaces are faceted. Material basis applies to catalog dimensions, not thread tolerances. Not manufacturer specifications.
Generic UNF pitch reference · Tungaloy| Family | Composi-Lok II (Monogram) |
|---|---|
| Head style | Reduced protruding hex head (source: Monogram drawing MBF2121 Rev U, title block, Table I, material notes) |
| Nominal diameter | 7/32" (-7) |
| Grip | max grip 1.350" (grip range 1.300-1.350", MBF2121 Rev U grip table) |
| Material | A286 CRES. Nut & screw: A286; sleeve: 304 stainless steel |
Decoded from the published numbering scheme; not a claim that this exact dash number is a stocked SKU.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Dimensions
| A | Head hex across flats | .343/.336 |
| D | Nut shank diameter | .2275/.2255 |
| G | Max grip + G: datum to the end of the nut shank | .035(ref) |
| H | Head height | .080/.073 |
| L | Max grip + L: datum to the end of the screw | .63(ref) |
| Recom. Hole | Drilled hole | .231/.228 |
All dimensions (19)Fewer dimensions
| B | Head diameter over the hex corners | .375min |
| E | SLEEVE and SCREW head diameter (2X) | .2275max |
| F | SCREW wrench flats, on the tail | .121/.116 |
| R | NUT head-to-shank radius | .030max |
| T | DRIVE NUT hex across flats | .375(ref) |
| Min Avail. Grip | Min available grip dash | -100 |
| J | Installed blind head diameter | .350min |
| K | Installed: blind side protrusion | .400max |
| Break-Off | Screw break-off, measured from the skin surface | +.103/-.000 |
| Tensile | Tensile structural failure, min (lbs) | 1600min, lbs |
| Double Shear | Double shear, min (lbs) | 6050min, lbs |
| Locking Torque | Locking torque, min (in-lbs) | 2.0min, in-lbs |
| Grip limits | Dash 7-1350 | 1.300-1.350 |
As printed on MBF2121 Rev U sheet 1 ↗. Letters match the drawing.
Some features are scaled from the figure, not dimensioned.Scaled features
Scaled from the drawing's figure (not drawing dimensions)
| Component / feature | Scaled as | Model (in) |
|---|---|---|
| NUTnut nose diameter at its end (diameter) | 0.768 x D | .1739 |
| NUTnut nose end, from the datum | 0.162 x L - G | -1.4814 |
| NUTnut bore = screw thread crest diameter (diameter) | 0.713 x D | .1615 |
| SCREWscrew thread crest diameter | 0.713 x D | .1615 |
| SLEEVEsleeve bore over the nut nose and the insert (diameter) | 0.839 x D | .1900 |
| SLEEVEsleeve bore beyond the insert (diameter) | 0.729 x D | .1651 |
| INSERTinsert outside diameter (= sleeve bore) | 0.839 x D | .1900 |
| INSERTinsert inside diameter (= sleeve bore beyond the insert) | 0.729 x D | .1651 |
| INSERTinsert end, from the datum | 0.368 x L - G | -1.6037 |
| SLEEVEcrimp line (start of the crimped band), from the datum | 0.724 x L - G | -1.8156 |
| SCREWscrew head top (sleeve end), from the datum | 0.826 x L - G | -1.8768 |
| SCREWscrew head corner radius | 0.062 x E | .0140 |
| SLEEVEsleeve top, from the datum (where the scaled nose meets the scaled sleeve bore) | 0.112 x L - G | -1.4519 |
| NUTnut nose taper (included angle) | angle, as drawn | 30.5° |
| DRIVE NUTdrive nut length | 1.064 x T | .3992 |
| DRIVE NUTdrive nut bearing diameter (cone end on the head) | 0.684 x T | .2567 |
| DRIVE NUTdrive nut bearing cone (half angle from the axis) | angle, as drawn | 30.9° |
| SCREWscrew tail beyond the drive nut | 1.056 x T | .3958 |
| SCREWwrench flats run: tail end to the drive nut (as drawn) | as drawn | .3958 |
Measured on MBF2121 Rev U sheet 1 figure at 300 dpi and kept as a ratio to a dimension this part number prints. Figure scale 596.5 px/in, fitting row -8, taken from D and E; checked against T (+0.6%), F (+1.2%), L - G (+1.1%), A (end view, across the corners: A / cos 30°) (-4.1%).
Also printed in MBF2121 Rev U for this part
| Recommended hole | .228-.231 in (MBF2121 Rev U sheet 1) |
|---|---|
| Installed blind head | J .350 in min diameter (MBF2121 Rev U sheet 1) |
| Installed protrusion | K .400 in max (TYPICAL INSTALLATION) (MBF2121 Rev U sheet 1) |
| Break-off limits | +.103 -.000 in, measured from the skin surface (MBF2121 Rev U sheet 1) |
| Tensile | 1600 lbs min (structural failure) (MBF2121 Rev U sheet 1) |
| Double shear | 6050 lbs min (MBF2121 Rev U sheet 1) |
| Locking torque | 2.0 in-lbs min (MBF2121 Rev U sheet 1) |
| Min available grip | dash -100 (MBF2121 Rev U sheet 1) |
| Material and heat treat | NUT & SCREW: A286 PER THE CHEMICAL REQUIREMENTS OF AMS5731, AMS5732, AMS5734 AND AMS5737. HEAT TREATED AS REQUIRED FOR PERFORMANCE. SLEEVE: 304 STAINLESS STEEL PER AMS5639, HEAT TREATED AS REQUIRED FOR PERFORMANCE. INSERT: ACETAL PER ASTM-D4181. DRIVE NUT: MILD STEEL. (MBF2121 Rev U material and finish notes) |
| Finish | NUT, SCREW & SLEEVE: PASSIVATE PER AMS-QQ-P-35. KAL-GARD ANN-RO #1013, CONVERSION COATING OPTIONAL. INSERT: NONE. DRIVE NUT: CORROSION RESISTANT COATING COLOR BLACK. (MBF2121 Rev U material and finish notes) |
| Lubricant | DRY FILM LUBE PER MIL-L-46010 TYPE I OR EVERLUBE #812 PER MIL-L-81329, PARAFFIN WAX, OR CETYL ALCOHOL PER MIL-L-87132. (MBF2121 Rev U material and finish notes) |
Series and strength (datasheet)
MBF2110 · MBF2111 · MBF2112 · MBF2113 · MBF2120 · MBF2121 · e.g. MBF2112-6-500
Rated shear 75 KSI (catalog comparison chart, MBF2112-06-500); 3/16" (-6) double shear 4,600 lb min, tensile 1,400 lb min, all materials & head styles (MBF2003 Table 10A).
Datasheet (PDF) ↗Section from Monogram drawing MBF2121 Rev U ↗ sheet 1.Drawing notes
Model: Monogram drawing MBF2121 Rev U
Envelope model, not manufacturer CAD.Model details
MBF2121-7-1350, manufacturer nominal. Simplified component model from Monogram drawing MBF2121 Rev U sheet 1. Manufacturer nominal: printed values, the mean where only two limits are printed. Flush heads hold the printed head angle; the head depth is derived. Not manufacturer CAD. Verify against the current drawing before use. One named solid per component as the drawing calls them out (NUT, SCREW, SLEEVE, INSERT and, where the drawing has one, DRIVE NUT). Features the drawing shows without a dimension are scaled from its figure and listed as scaled in the STEP header; threads are estimated, not drawing dimensions. The STEP file is an assembly: each component is its own named part with its own colour. STL comes as the whole part or one component at a time. Axis +Z, head up, z = 0 at the face the head bears on. STEP is in millimetres (estimated threads); STL is written in millimetres.
Other head styles, same diameter and grip
- MBF2120-7-1350 low profile protruding head
- MBF2112-7-1350 100° flush head
- MBF2113-7-1350 130° flush head
MBF2121 grip chart: 7/32" (-7)
Every catalogued max-grip dash number at this diameter. Stack thickness must fall inside the fastener's grip range: see the design calculators.
Other diameters at this grip:
Threaded / torqued · 4 steps
1/4Inserted
“Insert the fastener in the hole. The Composi-Lok® II can be inserted in a properly prepared hole without interference.”
Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.17, §7.2 ↗
Drawing traced from: Figure 15, left.
Source images (6): patent and government drawings
A patent drawing shows the patented design, which can differ in detail from today's catalog part. Each image says why it is tied to this family.






Required tooling, every brand
MBF2121-7-1350 (Composi-Lok II, 7/32") installs with MP550BFDN-7AA (MP550BF with MPPBF-08 + MPBF-07) Standard.
Other tools that work6 process-doc listings
As the fastener's own process document lists them
- MH75BFDN-7AA (MH75 with MHPDN-02 + MHBF-07) Standard Monogram MBF2003 Rev AG p.9 ↗
- MRT550BFDN-7AA (MRT550BF with MRTPBF-08 + MRTBF-7) Right angle Monogram MBF2003 Rev AG p.5 ↗
- MRC550BFDN-7AA (MRC550 with MRCPDN-02 + MRCBF-07) Close quarter Monogram MBF2003 Rev AG p.6 ↗
- MRCR250BFDN-7AA (MRCR250 with MRCRPDN-02 + MRCRMWBF-07) Close quarter Monogram MBF2003 Rev AG p.7 ↗
- MR550BFDN-7AA (MR550 with MRPDN-02A + MRBF-07) Right angle Monogram MBF2003 Rev AG p.8 ↗
- MHC75BFDN-7AA (MHC75B with MHCPDN-02 + MHCBF-07) Close quarter Monogram MBF2003 Rev AG p.10 ↗
Sources7
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.4, Table 1 ↗
- Wrench adapter (turns screw) MPBF-07; nose adapter (holds nut) MPPBF-08. A / B / C Ref. 1.81 / 1.70 / 0.56.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.9, Table 6 ↗
- Wrench adapter MHBF-07; nose adapter MHPDN-02. A / B Ref. 1.65 / .56.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.5, Table 2 ↗
- Wrench adapter MRTBF-7; nose adapter MRTPBF-08. A / B / C Ref. 1.80 / 1.68 / 0.56.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.6, Table 3 ↗
- Wrench adapter MRCBF-07; nose adapter MRCPDN-02. A / B Ref. .55 / .69.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.7, Table 4 ↗
- Wrench adapter MRCRMWBF-07; nose adapter MRCRPDN-02. A Ref. .81.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.8, Table 5 ↗
- Wrench adapter MRBF-07; nose adapter MRPDN-02A. A / B / C Ref. 1.77 / 1.65 / 0.56.
- Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.10, Table 7 ↗
- Wrench adapter MHCBF-07; nose adapter MHCPDN-02.
Diameter -7 (7/32"): decoded from the part number.
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Install tooling
Install tooling: MP550BFDN-7AA (Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.4, Table 1) · proprietary
- MGPCL Protruding head leaf gage (break-off check)
- RM3122-07 Removal nose piece module, protruding hex
Decode details
| Series | Composi-Lok II |
|---|---|
| Decode confidence | high |
| Numbering source | Monogram drawing MBF2121 Rev U, title block, Table I, material notes |
- Composi-Lok II grips: "incremental 0.050\" grip lengths" (MBF2003 §2.1); the grip dash is the max grip, e.g. -300 covers .250-.300" (MBF2110/2112/2113 drawings, grip table).
- Diameter dash per the drawing's basic-dimensions table (e.g. -6 = 3/16").
- Suffix "A" "designates dual drive nut system for robotic installation" (MBF2112 drawing note 1); MBF2003's installation tooling "not applicable to Composi-Lok II which have an 'A' suffix" (MBF2003 §1.1).
Government reference cross-reference (DLA FLIS)
MBF2121-7-1350 is not listed in FLIS under this exact part number (FLIS data as of 2025-03-18, March 2025 snapshot). FLIS may record it with a material or finish code, or under the standard part number.
Source: DLA PUB LOG ↗. Search any part number in the decoder.
- Composi-Lok II by Monogram, blind bolt
- Datasheet (PDF) ↗
- Manufacturer page ↗
- Numbering: Monogram drawing MBF2121 Rev U, title block, Table I, material notes ↗
- Geometry: MBF2121 Rev U ↗
Family-level estimate, not specific to MBF2121-7-1350: High (SpecLok sourcing assessment; no DLA lead time or stock on file for this part number)
Supply signal
Supply signalfor this part number
- Not listed in FLIS under this exact part number (March 2025 snapshot).
- No SpecLok quotes yet.
A signal from records SpecLok holds, not availability, stock or a lead-time promise. FLIS lists who has recorded a part number for the item, not who makes it today. DoD awards carry no NSN or part number, so award activity is for the item name's class.
Sources: DLA FLIS Data Electronic Reading Room (PUB LOG) ↗, DLA PUB LOG ↗, USAspending.gov award search API ↗; DoD award data 2025-10-01 to 2026-07-06; compiled 2026-10-02.
Image credits: Monogram Aerospace Fasteners, Monogram Aerospace Fasteners catalog, p.4 ↗. Product images belong to their manufacturers.
Sources
- Monogram drawing MBF2121 Rev U, title block, Table I, material notes
- Monogram MBF2003 Rev AG (Composi-Lok II install spec)
- Composi-Lok II datasheet (PDF)
- Drawing MBF2112 material notes; catalog comparison chart rates MBF2112-06-500 at 75 KSI
- Drawing MBF2120 material notes; MBF2003 Table 10A strengths apply to "all materials & head styles"
- DLA PUB LOG
- DLA FLIS Data Electronic Reading Room (PUB LOG)
- USAspending.gov award search API
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Composi-Lok II family page →Decode another part number →Not sure this is the right fastener? Use the selector →