What it is

Blind rivet, Cherry part number. 1/8" diameter (-4), read from CR 3213 - 4- 2 on the same NSN

Equivalents

• NAS9301BNASCitedIdentical, Cherry CA-1015 (CherryMAX process manual), "NAS vs. CherryMAX® Cross-Reference List" p.27 ↗
• AF3213-4-02AllfastCatalog onlySame NSN 5320-01-151-1061 (government catalog). Not a maker's approval: confirm on the drawing.
• CR3213-4-02CherryCatalog onlySame NSN 5320-01-151-1061 (government catalog). Not a maker's approval: confirm on the drawing.
• CR3213-4-02CherryCatalog onlySame NSN 5320-01-151-1061 (government catalog). Not a maker's approval: confirm on the drawing.
• HC3213-4-02HuckCatalog onlySame NSN 5320-01-151-1061 (government catalog). Not a maker's approval: confirm on the drawing.
• M7885/2-4-02MIL specificationsCatalog onlySame NSN 5320-01-151-1061 (government catalog). Not a maker's approval: confirm on the drawing.

+5 more reference numbers in the detail below.

Install tooling, by who made the part

• Cherry-made: H701B-456 pulling head on a G704B, G747 or G800 riveter (for -4, -5, -6; other diameters take other noses)
• Allfast-made (as AF3213-4-02): not documented: no tool catalog on file names a nose for it.Ask a tooling specialist →
• Huck-made (as HC3213-4-02): 99-3442 nose on a 2013 tool
• Other makers: not documented. Check the maker on the CoC or packaging, then ask that maker or a tooling specialist.

The nose follows the maker, not the stock number: check the maker on the CoC or packaging.

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Reference only: the drawing and its process spec govern. How to read this