What it is

Blind rivet, MIL specifications part number. 1/8" diameter (-4), read from CR 3213 - 4- 2 on the same NSN

Equivalents

• AF3213-4-02AllfastCatalog onlySame NSN 5320-01-151-1061 (government catalog). Not a maker's approval: confirm on the drawing.
• CR3213-4-02CherryCatalog onlySame NSN 5320-01-151-1061 (government catalog). Not a maker's approval: confirm on the drawing.
• CR3213-4-02CherryCatalog onlySame NSN 5320-01-151-1061 (government catalog). Not a maker's approval: confirm on the drawing.
• HC3213-4-02HuckCatalog onlySame NSN 5320-01-151-1061 (government catalog). Not a maker's approval: confirm on the drawing.
• NAS9301BNS-4-02NASCatalog onlySame NSN 5320-01-151-1061 (government catalog). Not a maker's approval: confirm on the drawing.
• CR-213-4-2CherryCatalog onlySame NSN 5320-01-151-1061 (government catalog). Not a maker's approval: confirm on the drawing.

+2 more reference numbers in the detail below.

Install tooling, by who made the part

• Allfast-made (as AF3213-4-02): not documented: no tool catalog on file names a nose for it.Ask a tooling specialist →
• Cherry-made (as CR3213-4-02): H701B-456 pulling head on a G704B, G747 or G800 riveter
• Huck-made (as HC3213-4-02): 99-3442 nose on a 2013 tool
• Other makers: not documented. Check the maker on the CoC or packaging, then ask that maker or a tooling specialist.

The nose follows the maker, not the stock number: check the maker on the CoC or packaging.

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Reference only: the drawing and its process spec govern. How to read this