← Tooling compatibility finder

H681-6F

H681 pulling head, Countersunk Head (156°) · Nose / pulling head · Standard

3D model not available: dimensions not published. 3D library

Fastener process documents that name it2
Other brands' equivalents0 statements

No cross-brand statement on file for these tools. Not documented is not the same as incompatible.

Sources1
  1. Cherry CA-1013 (CherryLOCK process manual), p.9, Selection Of Proper Hydro-shift Pulling Head, H681 Series ↗
    • "A separate pulling head is required for each diameter CherryLOCK rivet. It is acceptable that countersunk (C) pulling heads be used for installing both universal and countersunk head CherryLOCK rivets." Dims A and B as drawn on the CA-1013 p.9 figure.

Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.

Published dimensions3 · for envelope CAD

No dimensions are printed for this item in the catalogs on file.

As printed in the fastener process documents

Only dimensions a document prints are listed, with the feature each one measures. A length read from a part number by a rule the cited chart prints is marked "Not printed as a number". None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Find tooling for a part number →Tooling shop →