Blind rivet nut (MS27130, now NAS1329 / NAS1330) tooling, gauges and removal
generic-NAS · Blind rivet nut · Family page · Shop verification card · Get quotes for this tooling
By diameter
Tools, heads, adapters and gaugesCited tables
Published tool combinations
- Dia.Tool + nose / headAccessNotes and source
- #4-40 - 1/4"C6000Standard · hand"This chart covers products made from steel only." Mandrels and nose anvils per thread size are ordered separately (catalog Note 2).Böllhoff RIVNUT® catalog (US), p.29, Fastener/Tool Selection Guide, RIVNUT® column ↗
- #4-40 - 1/4"C845Standard · hand"This chart covers products made from steel only." Mandrels and nose anvils per thread size are ordered separately (catalog Note 2).Böllhoff RIVNUT® catalog (US), p.29, Fastener/Tool Selection Guide, RIVNUT® column ↗
- 5/16" - 1/2"C722Standard · hand"This chart covers products made from steel only." Mandrels and nose anvils per thread size are ordered separately (catalog Note 2).Böllhoff RIVNUT® catalog (US), p.29, Fastener/Tool Selection Guide, RIVNUT® column ↗
- #4-40 - 5/16"C302Standard · pneumatic"This chart covers products made from steel only." Mandrels and nose anvils per thread size are ordered separately (catalog Note 2).Böllhoff RIVNUT® catalog (US), p.29, Fastener/Tool Selection Guide, RIVNUT® column ↗
- #4-40 - 1/4"P1007Standard · pneumatic-hydraulic"This chart covers products made from steel only." Mandrels and nose anvils per thread size are ordered separately (catalog Note 2).Böllhoff RIVNUT® catalog (US), p.29, Fastener/Tool Selection Guide, RIVNUT® column ↗
- #4-40 - 3/8"P2005Standard · pneumatic-hydraulic"This chart covers products made from steel only." Mandrels and nose anvils per thread size are ordered separately (catalog Note 2).Böllhoff RIVNUT® catalog (US), p.29, Fastener/Tool Selection Guide, RIVNUT® column ↗
- #4-40 - 5/16"P2007Standard · pneumatic-hydraulic"This chart covers products made from steel only." Mandrels and nose anvils per thread size are ordered separately (catalog Note 2).Böllhoff RIVNUT® catalog (US), p.29, Fastener/Tool Selection Guide, RIVNUT® column ↗
- 5/16" - 1/2"P3007Standard · pneumatic-hydraulic"This chart covers products made from steel only." Mandrels and nose anvils per thread size are ordered separately (catalog Note 2).Böllhoff RIVNUT® catalog (US), p.29, Fastener/Tool Selection Guide, RIVNUT® column ↗
- #4-40 - 5/16"EPK CStandard · pneumatic-hydraulic"This chart covers products made from steel only." Mandrels and nose anvils per thread size are ordered separately (catalog Note 2).Böllhoff RIVNUT® catalog (US), p.29, Fastener/Tool Selection Guide, RIVNUT® column ↗
Installation tools
C6000
C6000 Single Lever Type hand tool
hand
"It features a plunger rotation knob for spin on and spin off of the RIVNUT® or PLUSNUT®." (p.28)
C845
C845 Wrench Type Stroke Tool
hand
"As the hex key is turned the tool exerts a linear pull stroke to install the RIVNUT® or PLUSNUT®." (p.28)
C722
C722 Wrench Type Stroke Tool
hand
"As the hex key is turned the tool exerts a linear pull stroke to install the RIVNUT® or PLUSNUT®." (p.28)
C302
C302 P Spin-pull to Stroke Pneumatic Tool
pneumatic
P1007
P1007 Lightweight Spin-pull to Pressure Pneumatic/Hydraulic Tool
pneumatic-hydraulic
- Max. Stroke
- .275 in. (7mm)
- Max. Pull Force
- 2900 lbf. (13 kN)
- Weight
- 4.0 lbs. (1.8 kg)
- Air
- 80 PSI (5.5 Bar)
P2005
P2005 Spin-pull to Stroke Pneumatic/Hydraulic Tool
pneumatic-hydraulic
- Max. Stroke
- .275 in. (7,0mm)
- Max. Pull Force
- 4700 lbs. (17kN), as printed
- Weight
- 4.5 lbs. (2.36kg), as printed
- Air
- 80 PSI (5.5 BAR)
P2007
P2007 Spin-pull to Pressure Pneumatic/Hydraulic Tool
pneumatic-hydraulic
- Max. Stroke
- .275 in. (7mm)
- Max. Pull Force
- 4700 lbf. (21 kN)
- Weight
- 4.9 lbs. (2.2 kg)
- Air
- 80 PSI (5.5 Bar)
P3007
P3007 High Strength Spin-pull to Pressure Pneumatic/Hydraulic Tool
pneumatic-hydraulic
- Max. Stroke
- .275 in. (7mm)
- Max. Pull Force
- 7,800 lbf. (35 kN)
EPK C
EPK C Electronically Operated Spin-pull to Pressure Pneumatic/Hydraulic Tool
pneumatic-hydraulic
- Max. Stroke
- .250 in. (6.5 mm)
- Max. Pull Force
- 4,700 lbs. (21 kN)
- Weight (pistol version)
- 5.1 lbs. (2.3 kg)
Tooling source notes
- MS27130F Note 2: "SPECIAL PULL-UP TOOLS ARE REQUIRED FOR PROPER INSTALLATION. MANUFACTURER'S RECOMMENDATIONS SHOULD BE FOLLOWED". The Böllhoff tools are the RIVNUT® maker's; the sheet names no tool.Government document, not interview: MS27130F p.5.
Removal (drill-out)None published
No published removal procedure found; follow the manufacturer's instructions. Manufacturer page ↗
Sources (1)
Tool tables are the manufacturer's as published in the cited revision; confirm current tool PNs with the manufacturer before purchase. Not a certified process authority: install and remove per the OEM process specification.
Next · Quote
Put the tooling on the RFQ
Your quote adds these tools and gauges for the diameters on your lines. Get quotes: SpecLok sources this from authorized distributors and returns price, lead time and certs.