Blind rivet nut (MS27130, now NAS1329 / NAS1330), generic-NAS
MS27130-A2
Blind-installed internally threaded rivet: a screw anchor in thin sheet from one side (MS27130, now NAS1329 / NAS1330).

- Style Flathead
- Thread size .112-40UNC-3B (dash 2)
- Grip range grip range .060-.085" (ident mark 1-RAD)
- Material Aluminum alloy (A): 6053-T4 except…
| Family | Blind rivet nut (MS27130, now NAS1329 / NAS1330) (generic-NAS) |
|---|---|
| Style | Flathead (source: MS27130F Table I (p.1-2)) |
| Thread size | .112-40UNC-3B (dash 2) |
| Grip range | grip range .060-.085" (ident mark 1-RAD) |
| Material | Aluminum alloy (A): 6053-T4 except temper, anodized (Requirements 1b, 2b) |
Decoded from the published numbering scheme; not a claim that this exact part number is a stocked SKU.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Series and loads (datasheet)
MS27130-[material][dash][K] · e.g. MS27130-A26K · superseded by NAS1329 (flat head) / NAS1330 (countersunk head)
MS27130F Table V, tensile strength / single shear strength, lbs min (AL ALY, STEEL, CRES, BRASS): .164: 415, 730, 980, 750 / 250, 500, 820, 475; .190: 525, 930, 1250, 950 / 320, 640, 1040, 610; .250: 980, 1580, 2140, 1720 / 600, 940, 1530, 1050 (MS27130F p.5). No torque-out, push-out or temperature is published on the sheet.
Other MS27130 part numbers
Sizes listed in MS27130F Tables I and III, Requirement 4 ↗
Threaded mandrel, pulled · 4 steps
1/4On the mandrel
“Thread RIVNUT® onto the tool mandrel”
Böllhoff RIVNUT® catalog (US), p.4, How the RIVNUT® works ↗
Drawing traced from: Fig. 2, the rivet on the threaded draw rod.
Source images (3): patent and government drawings
A patent drawing shows the patented design, which can differ in detail from today's catalog part. Each image says why it is tied to this family.



Install tooling: C302 (Böllhoff RIVNUT® catalog (US), p.29, Fastener/Tool Selection Guide, RIVNUT® column)
Required tooling, every brand
MS27130-A2 (Blind rivet nut (MS27130, now NAS1329 / NAS1330)) installs with C302 Standard.
Blind rivet nut (MS27130, now NAS1329 / NAS1330) tool tables
Other tools that work8 process-doc listings
As the fastener's own process document lists them
- P1007 Standard Böllhoff RIVNUT® catalog p.29 ↗
- P2005 Standard Böllhoff RIVNUT® catalog p.29 ↗
- P2007 Standard Böllhoff RIVNUT® catalog p.29 ↗
- P3007 Standard Böllhoff RIVNUT® catalog p.29 ↗
- EPK C Standard Böllhoff RIVNUT® catalog p.29 ↗
- C6000 Standard Böllhoff RIVNUT® catalog p.29 ↗
- C845 Standard Böllhoff RIVNUT® catalog p.29 ↗
- C722 Standard Böllhoff RIVNUT® catalog p.29 ↗
Sources1
- Böllhoff RIVNUT® catalog (US), p.29, Fastener/Tool Selection Guide, RIVNUT® column ↗
- "This chart covers products made from steel only." Mandrels and nose anvils per thread size are ordered separately (catalog Note 2).
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Decode details
| Series | MS27130 blind rivet nut, open end |
|---|---|
| Decode confidence | high |
| Numbering source | MS27130F p.5, Requirement 4 (part number); Tables I and III |
- "THE PART NUMBER CONSISTS OF THE MS NUMBER, PLUS THE DASH NUMBER"; a material letter goes before the dash (S steel, A aluminum alloy, CR corrosion resistant steel, B brass) and "FOR A KEYED NUT, ADD "K" AFTER THE DASH NUMBER" (MS27130F Requirement 4).
- No K: keyless nut.
- MS27130F was "canceled and superseded by NAS1329 and NAS1330" (Notice 1, 12 July 2001).
Family-level estimate, not specific to MS27130-A2: Medium (SpecLok sourcing assessment; no DLA lead time or stock on file for this part number)
Image credits: Böllhoff, RIVNUT® The Original Blind Rivet Nut (US catalog), p.5 ↗. Product images belong to their manufacturers.
Sources
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Blind rivet nut (MS27130, now NAS1329 / NAS1330) family page →Cross-reference this part number →Decode another part number →