Composi-Lok II, Monogram
MBF2110-5.5-350
Monogram Composi-Lok II: "high strength blind bolt for composite and metallic materials" (catalog).
- Head Low profile protruding head
- Diameter -5.5
- Grip .300-.350"
- Material Titanium
- Lead-time risk High
Install tool Monogram pneumatic and hand installation tools (MBF2003 §3, Figures 1-7, e.g. MP550BF pneumatic pistol), proprietary · Variable stack? Plan grips
CAD for MBF2110-5.5-350
| Family | Composi-Lok II (Monogram) |
|---|---|
| Head style | Low profile protruding head (source: Monogram drawing MBF2110 Rev AB, title block, Tables I, III, IV, material notes) |
| Nominal diameter | -5.5 |
| Grip | max grip .350" (grip range .300-.350", MBF2110 Rev AB grip table) |
| Material | Titanium. Nut: 6Al-4V titanium alloy; screw: A286 CRES; sleeve: 304 CRES |
Decoded from the published numbering scheme; not a claim that this exact dash number is a stocked SKU, and not a certified design authority. Always verify against the controlling drawing, spec, and your stress group.
Dimensions
| A | Head diameter | .354/.334 |
| D | Nut shank diameter | .1800/.1780 |
| G | Max grip + G: datum to the end of the nut shank | .017(ref) |
| H | Head height | .060/.053 |
| L | Max grip + L: datum to the end of the screw | .544(ref) |
| Recom. Hole | Drilled hole | .183/.181 |
All dimensions (19)Fewer dimensions
| E | SLEEVE and SCREW head diameter (2X) | .1796max |
| F | SCREW wrench flats, on the tail | .085/.080 |
| J | Installed blind head diameter | .260min |
| K | Installed: blind side protrusion | .325max |
| R | NUT head-to-shank radius | .030 |
| T | DRIVE NUT hex across flats | .375 |
| Z | Height of the cylindrical head edge | .030 |
| Min Avail. Grip | Min available grip dash | -100 |
| Break-Off | Screw break-off, measured from the skin surface | +.103/-.000 |
| Tensile | Tensile structural failure, min (lbs) | 900 |
| Double Shear | Double shear, min (lbs) | 3150 |
| Locking Torque | Locking torque, min (in-lbs) | 1.0 |
| Grip limits | Dash 5.5-350 | .300-.350 |
As printed on MBF2110 Rev AB sheet 2 ↗. Letters match the drawing.
Some features are scaled from the figure, not dimensioned.Scaled features
Scaled from the drawing's figure (not drawing dimensions)
| Component / feature | Scaled as | Model (in) |
|---|---|---|
| NUTnut nose diameter at its end (diameter) | 0.768 x D | .1374 |
| NUTnut nose end, from the datum | 0.162 x L - G | -.4523 |
| NUTnut bore = screw thread crest diameter (diameter) | 0.713 x D | .1276 |
| SCREWscrew thread crest diameter (threads not modelled) | 0.713 x D | .1276 |
| SLEEVEsleeve bore over the nut nose and the insert (diameter) | 0.839 x D | .1501 |
| SLEEVEsleeve bore beyond the insert (diameter) | 0.729 x D | .1305 |
| INSERTinsert outside diameter (= sleeve bore) | 0.839 x D | .1501 |
| INSERTinsert inside diameter (= sleeve bore beyond the insert) | 0.729 x D | .1305 |
| INSERTinsert end, from the datum | 0.368 x L - G | -.5607 |
| SLEEVEcrimp line (start of the crimped band), from the datum | 0.724 x L - G | -.7484 |
| SCREWscrew head top (sleeve end), from the datum | 0.826 x L - G | -.8026 |
| SCREWscrew head corner radius | 0.062 x E | .0111 |
| SLEEVEsleeve top, from the datum (where the scaled nose meets the scaled sleeve bore) | 0.112 x L - G | -.4263 |
| NUTnut nose taper (included angle) | angle, as drawn | 27.4° |
| DRIVE NUTdrive nut length | 1.064 x T | .3992 |
| DRIVE NUTdrive nut bearing diameter (cone end on the head) | 0.684 x T | .2567 |
| DRIVE NUTdrive nut bearing cone (half angle from the axis) | angle, as drawn | 30.6° |
| SCREWscrew tail beyond the drive nut | 1.073 x T | .4025 |
| SCREWwrench flats run: tail end to the drive nut (as drawn) | as drawn | .4025 |
| NUThead chamfer above the Z edge (angle from the axis) | angle, as drawn | 44.5° |
Measured on MBF2110 Rev AB sheet 1 figure at 300 dpi and kept as a ratio to a dimension this part number prints. Figure scale 591.5 px/in, fitting row -8, taken from A and E; checked against D (+1.4%), T (+1.4%), F (+3.4%), L - G (+2.0%).
Also printed in MBF2110 Rev AB for this part
| Recommended hole | .181-.183 in (MBF2110 Rev AB sheet 2) |
|---|---|
| Installed blind head | J .260 in min diameter (MBF2110 Rev AB sheet 2) |
| Installed protrusion | K .325 in max (TYPICAL INSTALLATION) (MBF2110 Rev AB sheet 2) |
| Break-off limits | +.103 -.000 in, measured from the skin surface (MBF2110 Rev AB sheet 1 (Table I, same as the nominal size)) |
| Tensile | 900 lbs min (structural failure) (MBF2110 Rev AB sheet 1 (Table I, same as the nominal size)) |
| Double shear | 3150 lbs min (MBF2110 Rev AB sheet 1 (Table I, same as the nominal size)) |
| Locking torque | 1.0 in-lbs min (MBF2110 Rev AB sheet 1 (Table I, same as the nominal size)) |
| Min available grip | dash -100 (MBF2110 Rev AB sheet 1 (Table I, same as the nominal size)) |
| Material and heat treat | NUT: 6Al-4V TITANIUM ALLOY PER AMS-T-9047 STA OR AMS4928 OR AMS4967 HEAT TREATED PER AMS-H-81200 TO 95 KSI SHEAR STRENGTH MINIMUM. MAXIMUM HYDROGEN CONTENT 125 PPM. SCREW: A286 CRES PER AMS5731, AMS5732 OR AMS5737 HEAT TREATED TO 175 KSI TENSILE MINIMUM. SLEEVE: 304 CRES PER AMS5639, FULLY ANNEALED. INSERT: ACETAL PER ASTM-D6778 DRIVE NUT: MILD STEEL (MBF2110 Rev AB material and finish notes) |
| Finish | ( - ) NUT: KAL-GARD ANN-RO #1012 CONVERSION COATING OR PHOSPHATE FLOURIDE PER MONOGRAM SPECIFICATION PS741, MAY BE USED AT MANUFACTURER'S OPTION. SLEEVE AND SCREW: PASSIVATE PER AMS2700, KAL-GARD ANN-RO #1013 CONVERSION COATING OPTIONAL. INSERT: NONE DRIVE NUT: COLOR GRAY (MBF2110 Rev AB material and finish notes) |
| Lubricant | SOLID FILM LUBRICANT PER AS5272 TYPE I OR TYPE II. PARAFFIN WAX, OR CETYL ALCOHOL PER AS87132 (AS REQUIRED FOR PERFORMANCE). (SEE FINISH CODE FOR ADDITIONAL RESTRICTIONS). (MBF2110 Rev AB material and finish notes) |
Series and strength (datasheet)
MBF2110 · MBF2111 · MBF2112 · MBF2113 · MBF2120 · MBF2121 · e.g. MBF2112-6-500
Rated shear 75 KSI (catalog comparison chart, MBF2112-06-500); 3/16" (-6) double shear 4,600 lb min, tensile 1,400 lb min, all materials & head styles (MBF2003 Table 10A).
Datasheet (PDF) ↗Section from Monogram drawing MBF2110 Rev AB ↗ sheet 2.Drawing notes
Model: Monogram drawing MBF2110 Rev AB
Envelope model, not manufacturer CAD.Model details
MBF2110-5.5-350, manufacturer nominal. Simplified component model from Monogram drawing MBF2110 Rev AB sheet 2. Manufacturer nominal: printed values, the mean where only two limits are printed. Flush heads hold the printed head angle; the head depth is derived. Not manufacturer CAD. Verify against the current drawing before use. One named solid per component as the drawing calls them out (NUT, SCREW, SLEEVE, INSERT and, where the drawing has one, DRIVE NUT). Features the drawing shows without a dimension are scaled from its figure and listed as scaled in the STEP header; threads are not modelled. Axis +Z, head up, z = 0 at the face the head bears on. STEP (AP214) is in inches; STL has no units and is written in millimetres.
Other head styles, same diameter and grip
- MBF2111-5.5-350 reduced protruding hex head
- MBF2112-5.5-350 100° flush head
- MBF2113-5.5-350 130° flush head
MBF2110 grip chart: -5.5
Every catalogued max-grip dash number at this diameter. Stack thickness must fall inside the fastener's grip range: see the design calculators.
Other diameters at this grip:
Threaded / torqued · 4 steps
1/4Inserted
“Insert the fastener in the hole. The Composi-Lok® II can be inserted in a properly prepared hole without interference.”
Monogram MBF2003 Rev AG (Composi-Lok II install spec), p.17, §7.2 ↗
Drawing traced from: Figure 15, left.
Source images (6): patent and government drawings
A patent drawing shows the patented design, which can differ in detail from today's catalog part. Each image says why it is tied to this family.
Install tooling
Install tooling: Monogram pneumatic and hand installation tools (MBF2003 §3, Figures 1-7, e.g. MP550BF pneumatic pistol) · proprietary
- MGPCL Protruding head leaf gage (break-off check)
- RM3118-5.5 Removal nose piece module, flush head style
Decode details
| Series | Composi-Lok II |
|---|---|
| Decode confidence | high |
| Numbering source | Monogram drawing MBF2110 Rev AB, title block, Tables I, III, IV, material notes |
- Composi-Lok II grips: "incremental 0.050\" grip lengths" (MBF2003 §2.1); the grip dash is the max grip, e.g. -300 covers .250-.300" (MBF2110/2112/2113 drawings, grip table).
- Diameter dash per the drawing's basic-dimensions table (e.g. -6 = 3/16").
- Suffix "A" "designates dual drive nut system for robotic installation" (MBF2112 drawing note 1); MBF2003's installation tooling "not applicable to Composi-Lok II which have an 'A' suffix" (MBF2003 §1.1).
Government reference cross-reference (DLA FLIS)
MBF2110-5.5-350 is not listed in FLIS under this exact part number (FLIS data as of 2025-03-18, March 2025 snapshot). FLIS may record it with a material or finish code, or under the standard part number.
Source: DLA PUB LOG ↗. Search any part number in the decoder.
- Composi-Lok II by Monogram, blind bolt
- Datasheet (PDF) ↗
- Manufacturer page ↗
- Numbering: Monogram drawing MBF2110 Rev AB, title block, Tables I, III, IV, material notes ↗
- Geometry: MBF2110 Rev AB ↗
Lead-time risk for this family (SpecLok sourcing assessment): High
Supply signal
Supply signalfor this part number
- Not listed in FLIS under this exact part number (March 2025 snapshot).
- No SpecLok quotes yet.
A signal from records SpecLok holds, not availability, stock or a lead-time promise. FLIS lists who has recorded a part number for the item, not who makes it today. DoD awards carry no NSN or part number, so award activity is for the item name's class.
Sources: DLA FLIS Data Electronic Reading Room (PUB LOG) ↗, DLA PUB LOG ↗, USAspending.gov award search API ↗; DoD award data 2025-10-01 to 2026-07-06; compiled 2026-09-28.
Image credits: Monogram Aerospace Fasteners, Monogram Aerospace Fasteners catalog, p.4 ↗. Product images belong to their manufacturers.
Sources
- Monogram drawing MBF2110 Rev AB, title block, Tables I, III, IV, material notes
- Monogram MBF2003 Rev AG
- Composi-Lok II datasheet (PDF)
- Drawing MBF2112 material notes; catalog comparison chart rates MBF2112-06-500 at 75 KSI
- Drawing MBF2120 material notes; MBF2003 Table 10A strengths apply to "all materials & head styles"
- DLA PUB LOG
- DLA FLIS Data Electronic Reading Room (PUB LOG)
- USAspending.gov award search API
Next · Quote
Your quote
Get quotes above adds this part and its install tooling. The quote screen takes your email, need-by and certs.