HC3213-4-09
- What it is
- Blind rivet, Huck part number. 1/8" diameter (-4), read from CR3213-4-09 on the same NSN
- Equivalents
- NAS9301BH-4-09NASNeeds approvalFunctional substitute, needs engineering approval, Howmet, "How to order Huck-Clinch® Blind Rivets" p.2 ↗
- AF3213-4-09AllfastCatalog onlySame NSN 5320-01-263-4360 (government catalog). Not a maker's approval: confirm on the drawing.
- CR3213-4-09CherryCatalog onlySame NSN 5320-01-263-4360 (government catalog). Not a maker's approval: confirm on the drawing.
- M7885/2-4-09MIL specificationsCatalog onlySame NSN 5320-01-263-4360 (government catalog). Not a maker's approval: confirm on the drawing.
- NAS9301BNS-4-09NASCatalog onlySame NSN 5320-01-263-4360 (government catalog). Not a maker's approval: confirm on the drawing.
- Install tooling, by who made the part
- Huck-made: 99-3442 nose on a Model 2013 installation tool
- Allfast-made (as AF3213-4-09): not documented: no tool catalog on file names a nose for it.Ask a tooling specialist →
- Cherry-made (as CR3213-4-09): H701B-456 pulling head on a G704B, G747 or G800 riveter
- Other makers: not documented. Check the maker on the CoC or packaging, then ask that maker or a tooling specialist.
The nose follows the maker, not the stock number: check the maker on the CoC or packaging.
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Reference only: the drawing and its process spec govern. How to read this
Every size and maker in the HC3213 series →
Full detail: decode, cited documents, every stock number
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.