Cross reference · MS (US military standards) · Blind rivet
MS90354S cross reference: Cherry CR7311S, Huck SBPT06, LISI SBPT6
MS90354S is a blind rivet series on 36 government stock numbers. It is cross-referenced to Cherry CR7311S, Huck SBPT06, LISI SBPT6. Each one is labeled with how strong the evidence is.
MS90354S
- What it is
- Blind rivet series, on 36 government stock numbers
- Equivalents
- CR7311CherryCitedApproved alternate, Cherry CA-1009 (MAXIBOLT), "Cherry Maxibolt® interchangeability" table p.11 ↗
- CR7311SCherryCitedApproved alternate, Cherry CA-1009 (MAXIBOLT), "Cherry Maxibolt® interchangeability" table p.11 ↗
- SBPT06HuckCatalog onlyGovernment catalog: on 17 of 36 stock numbers. Confirm on the drawing.
- SBPT05HuckCatalog onlyGovernment catalog: on 13 of 36 stock numbers. Confirm on the drawing.
- SBPT6LISICatalog onlyGovernment catalog: on 11 of 36 stock numbers. Confirm on the drawing.
- SBPT5LISICatalog onlyGovernment catalog: on 9 of 36 stock numbers. Confirm on the drawing.
- Install tooling, by who made the part
- Cherry Maxibolt: G704B with H701B-456
The nose follows the maker, not the stock number: check the maker on the CoC or packaging.
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Reference only: the drawing and its process spec govern. How to read this
- Issued by MS
- Item Blind rivet
- Stock numbers 36
- Cross-referenced series 7, 1 cited
Documented equivalents
- CR7311 Cherry Aerospace · Approved alternate
Source
Cherry CA-1009 (MAXIBOLT), "Cherry Maxibolt® interchangeability" table, p.11 ↗
CA-1009: "This product meets the requirements of MS90353 (except for zinc plating and NAS 4006 Alum coating) for “-” code parts, in the -05, -06, -08, and -10 diameter series; and for “S” code parts in the S05 and S06 diameter series." (CA-1009 prints MS90353 in this CR7311 note; its p.11 table and part number examples pair CR7311 with MS90354.) Part number examples: CR7311S-06-04 = MS90354S0604, CR7311-06-04 = MS90354-0604 (CA-1009 p.5).
The dash numbers are written differently: complete them from the cited document (example in the note).
Related, not equivalents (other head, material or the procurement spec): MS90353, CR7310
Series in the government catalog
Catalog-only listings need engineering approval before you substitute.
Manufacturers
- CR7311SCherry AerospaceApproved alternateon 7 of 36 stock numbers, 7 sizesCherry CA-1009 (MAXIBOLT), "Cherry Maxibolt® interchangeability" table, p.11 ↗
- SBPT06HuckCatalog only, needs approvalon 17 of 36 stock numbers, 17 sizes
- SBPT05HuckCatalog only, needs approvalon 13 of 36 stock numbers, 13 sizes
- SBPT6LISI AerospaceCatalog only, needs approvalon 11 of 36 stock numbers, 11 sizes
- SBPT5LISI AerospaceCatalog only, needs approvalon 9 of 36 stock numbers, 9 sizes
- 73755SSPS TechnologiesCatalog only, needs approvalon 2 of 36 stock numbers, 2 sizes
- VB90354Howmet Fastening SystemsCatalog only, needs approvalon 2 of 36 stock numbers, 2 sizes
Plus 2 reference numbers whose issuer SpecLok does not identify (distributors and catalog agencies are not named).
Get quotes for MS90354S
Cited equivalents go on the request as acceptable alternates. Catalog-only listings do not.
Install tooling, by who made the part
- Cherry Maxibolt: G704B with H701B-456Cherry CA-1039 (MAXIBOLT process manual), p.23, Installation Tool Selection Chart
The nose and tool follow who made the part, not the stock number: an equivalent fastener does not make another maker's noses interchangeable. Check the maker on the CoC or packaging, then use part number to tool.
Sizes by maker
| NSN | MS90354S | CR7311S | SBPT06 | SBPT6 | DLA median, 12 mo |
|---|---|---|---|---|---|
| 5320-01-081-0857 | MS90354S0501 | ||||
| 5320-01-056-7275 | MS90354S0502 | CR7311S-5-02 | |||
| 5320-00-162-6642 | MS90354S0503 | CR7311S-5-03 | |||
| 5320-00-164-0852 | MS90354S0504 | CR7311S-5-04 | |||
| 5320-00-160-3140 | MS90354S0505 | CR7311S-5-05 | |||
| 5320-00-160-3141 | MS90354S0506 | CR7311S-5-6 | |||
| 5320-00-160-3142 | MS90354S0507 | ||||
| 5320-00-160-3143 | MS90354S0508 | ||||
| 5320-00-160-3144 | MS90354S0509 | ||||
| 5320-00-160-3145 | MS90354S0510 | ||||
| 5320-00-171-6081 | MS90354S0511 | ||||
| 5320-00-162-6646 | MS90354S0512 | ||||
| 5320-01-217-7833 | MS90354S0513 | CR7311S-05-13 | |||
| 5320-01-217-0800 | MS90354S0514 | ||||
| 5320-00-160-3208 | MS90354S0515 |
Show 21 more sizes
| NSN | MS90354S | CR7311S | SBPT06 | SBPT6 | DLA median, 12 mo |
|---|---|---|---|---|---|
| 5320-00-170-3009 | MS90354S0516 | ||||
| 5320-00-160-3209 | MS90354S0602 | CR7311S-6-02 | SBP-T06-02 | SBPT6-02 | |
| 5320-01-492-6578 | MS90354S0603 | SBP-T06-03 | |||
| 5320-00-160-3215 | MS90354S0604 | SBP-T06-04 | SBPT6-4 | ||
| 5320-00-160-3250 | MS90354S0605 | SBP-T06-05 | SBPT6-5 | ||
| 5320-00-156-4564 | MS90354S0606 | SBP-T06-06 | SBPT6-06 | ||
| 5320-00-156-4566 | MS90354S0607 | SBP-T06-07 | SBPT6-7 | ||
| 5320-00-156-4567 | MS90354S0608 | SBP-T06-08 | SBPT6-8 | ||
| 5320-00-156-4568 | MS90354S0609 | SBP-T06-09 | SBP-T6-9 | ||
| 5320-00-156-4569 | MS90354S0610 | SBP-T06-10 | SBPT6-10 | ||
| 5320-00-160-3251 | MS90354S0611 | SBP-T06-11 | SBPT6-11 | ||
| 5320-00-156-4576 | MS90354S0612 | SBP-T06-12 | SBPT6-12 | ||
| 5320-01-721-5171 | MS90354S0613 | ||||
| 5320-00-156-4579 | MS90354S0614 | SBP-T06-14 | |||
| 5320-00-156-4580 | MS90354S0615 | SBP-T06-15 | |||
| 5320-00-160-3252 | MS90354S0616 | SBP-T06-16 | |||
| 5320-00-161-2414 | MS90354S0617 | SBP-T06-17 | SBP-T6-17 | ||
| 5320-01-059-3440 | MS90354S0618 | SBP-T06-18 | |||
| 5320-00-170-3011 | MS90354S0619 | SBP-T06-19 | |||
| 5320-01-232-1529 | MS90354S0622 | ||||
| 5320-01-531-7782 | MS90354S0803 |
Each row is one National Stock Number and the part numbers DLA FLIS lists on it, as written there. A blank means FLIS lists no part in that series on the stock number, not that the size does not exist.
Sources and how to read this page.Details
Reference numbers the Federal Logistics Information System records against the same National Stock Number. A supply-catalog cross-reference, not an engineering-approved interchangeability: confirm against the controlling drawing or spec before substituting. Only equivalents marked cited have a manufacturer or government document, linked with each.
Source: DLA Federal Logistics Information System, via DLA PUB LOG ↗ (FLIS Data Electronic Reading Room ↗), data as of 2025-03-18 (March 2025 snapshot). Federal supply class 5320 Rivets. Issuer names are SpecLok's reading of the filing CAGE code; distributors are not named. Compiled 2026-10-03.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.