Cross reference · MS (US military standards) · Blind rivet
MS21140S cross reference
MS21140S is a blind rivet series on 31 government stock numbers. Each one is labeled with how strong the evidence is.
MS21140S
- What it is
- Blind rivet series, on 31 government stock numbers
- Equivalents
- Install tooling, by who made the part
- Cherry Maxibolt: G704B with H701B-456
The nose follows the maker, not the stock number: check the maker on the CoC or packaging.
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Reference only: the drawing and its process spec govern. How to read this
- Issued by MS
- Item Blind rivet
- Stock numbers 31
- Cross-referenced series 3
Documented equivalents
- CR7620 Cherry Aerospace · Approved alternate
Source
Cherry CA-1009 (MAXIBOLT), "Cherry Maxibolt® interchangeability" table, p.11 ↗
CA-1009: "This product meets the requirements of MS21140 for “-” and “S” code parts, except for “D” and “DN” finish codes." Part number examples: CR7620S-06-04 = MS21140S0604, CR7620-06-04 = MS21140-0604 (CA-1009 p.4).
The dash numbers are written differently: complete them from the cited document (example in the note).
Related, not equivalents (other head, material or the procurement spec): MS21141, CR7621
Series in the government catalog
Catalog-only listings need engineering approval before you substitute.
Manufacturers
- SB100HuckCatalog only, needs approvalon 7 of 31 stock numbers, 13 sizes
1 more on one stock number each: SB100EU
- SB100EUHuckCatalog only, needs approvalon 1 of 31 stock numbers
Standards
- NASM21140NASCatalog only, needs approvalon 4 of 31 stock numbers
Plus 2 reference numbers whose issuer SpecLok does not identify (distributors and catalog agencies are not named).
Get quotes for MS21140S
Cited equivalents go on the request as acceptable alternates. Catalog-only listings do not.
Install tooling, by who made the part
- Cherry Maxibolt: G704B with H701B-456Cherry CA-1039 (MAXIBOLT process manual), p.23, Installation Tool Selection Chart
The nose and tool follow who made the part, not the stock number: an equivalent fastener does not make another maker's noses interchangeable. Check the maker on the CoC or packaging, then use part number to tool.
Sizes by maker
| NSN | MS21140S | SB100 | NASM21140 | DLA median, 12 mo |
|---|---|---|---|---|
| 5320-01-686-9115 | MS21140S04-06 | NASM21140 | ||
| 5320-01-686-8827 | MS21140S04-07 | NASM21140 | ||
| 5320-01-686-8833 | MS21140S04-08 | NASM21140 | ||
| 5320-01-586-6467 | MS21140S0402 | |||
| 5320-01-586-6471 | MS21140S0403 | NASM21140 | ||
| 5320-01-586-6474 | MS21140S0404 | |||
| 5320-01-586-6477 | MS21140S0405 | |||
| 5320-01-197-1606 | MS21140S0502 | |||
| 5320-01-193-2439 | MS21140S0503 | |||
| 5320-01-156-4448 | MS21140S0504 | SB100-EU05-04 | ||
| 5320-01-194-0709 | MS21140S0505 | |||
| 5320-01-300-2078 | MS21140S0506 | |||
| 5320-01-152-8699 | MS21140S0507 | SB100-EU05-07 | ||
| 5320-01-338-4195 | MS21140S0508 | |||
| 5320-01-469-9941 | MS21140S0509 |
Show 16 more sizes
| NSN | MS21140S | SB100 | NASM21140 | DLA median, 12 mo |
|---|---|---|---|---|
| 5320-01-469-9943 | MS21140S0510 | |||
| 5320-01-509-4412 | MS21140S0511 | |||
| 5320-01-436-6919 | MS21140S0602 | |||
| 5320-01-152-8694 | MS21140S0603 | SB100-EU06-03 | ||
| 5320-01-152-8695 | MS21140S0605 | SB100-EU06-05 | ||
| 5320-01-152-8696 | MS21140S0606 | SB100-EU06-06 | ||
| 5320-01-152-8697 | MS21140S0607 | SB100-EU06-07 | ||
| 5320-01-152-8698 | MS21140S0608 | SB100-EU06-08 | ||
| 5320-01-193-2440 | MS21140S0609 | |||
| 5320-01-509-4416 | MS21140S0610 | |||
| 5320-01-193-4531 | MS21140S0611 | |||
| 5320-01-194-0710 | MS21140S0612 | |||
| 5320-01-323-7991 | MS21140S0613 | |||
| 5320-01-645-5631 | MS21140S0614 | |||
| 5320-01-330-4824 | MS21140S0615 | |||
| 5320-01-323-7992 | MS21140S0617 |
Each row is one National Stock Number and the part numbers DLA FLIS lists on it, as written there. A blank means FLIS lists no part in that series on the stock number, not that the size does not exist.
Sources and how to read this page.Details
Reference numbers the Federal Logistics Information System records against the same National Stock Number. A supply-catalog cross-reference, not an engineering-approved interchangeability: confirm against the controlling drawing or spec before substituting. Only equivalents marked cited have a manufacturer or government document, linked with each.
Source: DLA Federal Logistics Information System, via DLA PUB LOG ↗ (FLIS Data Electronic Reading Room ↗), data as of 2025-03-18 (March 2025 snapshot). Federal supply class 5320 Rivets. Issuer names are SpecLok's reading of the filing CAGE code; distributors are not named. Compiled 2026-10-03.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.