← Tooling compatibility finder
MRC250
MRCR 250 Close Quarter Ratchet Tool · Installation tool · Close quarter
MRC250 installs Visu-Lok -5, -6, -8, per the fastener's process document. Monogram PLT5002 Rev N p.8 ↗
Fastener process documents that name it1
- Visu-Lok -5, -6, -8 Monogram PLT5002 Rev N p.8 ↗
Other brands' equivalents0 statements
No cross-brand statement on file for these tools. Not documented is not the same as incompatible.
Sources1
Tool catalogs are the manufacturers' as published in the cited edition; confirm current PNs with the tool maker before purchase. Install per the OEM process specification.
Published dimensions6 · for envelope CAD
No dimensions are printed for this item in the catalogs on file.
As printed in the fastener process documents
- As dimensioned: 13 ½" Ref. overall; 2 3/8" Ref.; 20° offset (Visu-Lok, Monogram PLT5002 Rev N (Visu-Lok II install spec), p.8, Figure 5 ↗)
- Operating pressure: 90PSI (Min) (Visu-Lok, Monogram PLT5002 Rev N (Visu-Lok II install spec), p.8, Figure 5 ↗)
- Torque output: 80 IN-LBS (Visu-Lok, Monogram PLT5002 Rev N (Visu-Lok II install spec), p.8, Figure 5 ↗)
- Motor speed: 250 RPM (Visu-Lok, Monogram PLT5002 Rev N (Visu-Lok II install spec), p.8, Figure 5 ↗)
- Air consumption at free speed: 22 CFM (Visu-Lok, Monogram PLT5002 Rev N (Visu-Lok II install spec), p.8, Figure 5 ↗)
- Weight: 4 LBS (Visu-Lok, Monogram PLT5002 Rev N (Visu-Lok II install spec), p.8, Figure 5 ↗)
Only dimensions a document prints are listed, with the feature each one measures. None of these catalogs publishes nose tip or anvil geometry detailed enough to machine from.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next · 3 Quote
Put the tool on the quote
Add to quote puts this PN on the one quote with its citation. Tooling needs no lot traceability.