Shop verification card
Standard blind rivet (NAS1398/NAS1399 wiredraw)
generic-NAS · Blind rivet · NAS1398 (universal head) / NAS1399 (countersunk head) · e.g. NAS1398B = CR2263
speclok.com
11/16/2026
Install sequence
1. Inserted, sheet gap
2. Blind head forms
3. Clamp-up
4. Stem wire-draws
5. Stem stops flush
6. Locked, stem breaks flush
Traced from Cherry CA-1005 (CherryLOCK), p.12, Installation Sequence. Not to scale.
Before you install
- Diameters offered: 1/8, 5/32, 3/16, 1/4"
- Tool: Pulling head per CA-1005 tooling notes (e.g. H681-( )F series)
- Standard shop tooling.
- Training: Not stated in the cited documents.
- Lead-time risk: Low
Installed preload
No verification data on file for this family.
Gauge kit (published part numbers)
| Gauge | Sizes | Checks / limits | Source |
|---|---|---|---|
| 269C3 | all | Grip gage for CherryMAX & CherryLOCK rivets | Cherry CA-1013 (CherryLOCK process manual), p.12, Gages |
| T172-3 | -3 | T172 GO/NO-GO hole gage | Cherry CA-1013 (CherryLOCK process manual), p.12, Gages |
| T172-4 / T172-400 (bulbed) | -4 | T172 GO/NO-GO hole gage | Cherry CA-1013 (CherryLOCK process manual), p.12, Gages |
| T172-5 / T172-500 (bulbed) | -5 | T172 GO/NO-GO hole gage | Cherry CA-1013 (CherryLOCK process manual), p.12, Gages |
| T172-6 / T172-600 (bulbed) | -6 | T172 GO/NO-GO hole gage | Cherry CA-1013 (CherryLOCK process manual), p.12, Gages |
| T172-8 | -8 | T172 GO/NO-GO hole gage | Cherry CA-1013 (CherryLOCK process manual), p.12, Gages |
| P913 | -3 | Anvil gage (go no-go) | Cherry CA-1013 (CherryLOCK process manual), p.12, Gages |
| P856 | -4 | Anvil gage (go no-go) | Cherry CA-1013 (CherryLOCK process manual), p.12, Gages |
| P857 | -5 | Anvil gage (go no-go) | Cherry CA-1013 (CherryLOCK process manual), p.12, Gages |
| P858 | -6 | Anvil gage (go no-go) | Cherry CA-1013 (CherryLOCK process manual), p.12, Gages |
| P859 | -8 | Anvil gage (go no-go) | Cherry CA-1013 (CherryLOCK process manual), p.12, Gages |
| 680A159 | all | Setting gage | Cherry CA-1013 (CherryLOCK process manual), p.12, Gages |
Removal
Published: Cherry CA-1005 (CherryLOCK catalog, covers wiredraw NAS1398/NAS1399), Rivet Removal. CAUTION: Never drill completely through the rivet sleeve to remove a rivet as this will tend to enlarge the hole. Steps: speclok.com/tooling/nas1900-blind-rivet#removal
Sources
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers