Shop verification card
Jo-Bolt
generic-NAS · Hex-drive blind bolt · NAS1669 (alloy steel protruding head) / NAS1670 (alloy steel flush head) (Visu-Lok II brochure p.6 cross-reference)
speclok.com
11/16/2026
Install sequence
Before you install
- Diameters offered: 5/32, 3/16, 1/4, 5/16, 3/8"
- Tool: Drive nut blind bolt tooling (FAA-H-8083-31B p.4-54)
- Special, non-proprietary tooling.
- Training: "Use the grip gauge available for the type of fastener and select the bolt grip after careful determination of the material thickness. The grip of the bolt is critical for correct installation." (FAA-H-8083-31B p.4-54). No public edge distance or spacing rule was found.
- Lead-time risk: Medium
Installed preload
Not published in any public document read (FAA-H-8083-31B, Monogram Visu-Lok II brochure). The NAS1669/1670 standards are paywalled.
Removal
No published removal procedure found; follow the manufacturer's instructions. Steps: speclok.com/tooling/jo-bolt#removal
Accept / reject after install
- "Use the grip gauge available for the type of fastener and select the bolt grip after careful determination of the material thickness. The grip of the bolt is critical for correct installation." (FAA-H-8083-31B p.4-54)
- "The stem of Jo-bolts, Visu-lok®, and Composi-Lok® II fasteners does not break off flush with the head. A screw break-off shaver tool must be used if a flush installation is required." (FAA-H-8083-31B p.4-54)
- No public Jo-Bolt break-off limits, head seating or torque check were found.
Check gauges
- Grip gauge before install (FAA-H-8083-31B p.4-54). No installed-condition gauge is named in a public document.
Sources: FAA-H-8083-31B p.4-54. Acceptance limits belong to the controlling spec: verify against your program's process documentation before use on hardware.
Sources
1
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers