Shop verification card
Hi-Lite
LISI · Pin and collar · HST10 Hi-Lite ST pin (Hi-Shear) · e.g. HST10-8-8 / HST1079-8-8
speclok.com
11/16/2026
Install sequence
Installed
Installed view only (no public install sequence). Traced from Hi-Shear HST10 drawing, p.sheet 1, Hi-Lite ST pin and collar after assembly. Not to scale.
Before you install
- Diameters offered: 5/32, 3/16, 1/4, 5/16, 3/8"
- Tool: Hex key and collar driver
- Standard shop tooling.
- Training: Not stated in the cited documents.
- Lead-time risk: Medium
Installed preload
Preload force is not published. Collar torque-off ranges are published per size on the LISI HST collar drawings (Hi-Lite Product Specification 381): HST1078 A-286 tension collar -5: 30-40 in-lb, -6: 40-50, -8: 110-130, -10: 200-250, up to -20: 1350-1550.
Removal
No published removal procedure found; follow the manufacturer's instructions. Steps: speclok.com/tooling/hi-lite#removal
Accept / reject after install
- Wrenching element must have broken away at the controlled torque; no further torque inspection is specified.
- Post-install dimensional criteria are not published on the collar drawing; consult the program process spec.
Check gauges
- None published on the LISI drawings checked.
Sources: HST1078 collar drawing (LISI) · LISI Hi-Lok / Hi-Lite collars. Acceptance limits belong to the controlling spec: verify against your program's process documentation before use on hardware.
Sources
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers