Shop verification card
Cherry 1900 bulbing blind rivet
Cherry · Blind rivet · CR1919 (protruding head) / CR1921 (flush head) · NAS1919 / NAS1921 · e.g. CR1919M04S05WU
speclok.com
11/16/2026
Install sequence
Installed
Installed view only (no public install sequence). Traced from Cherry CA-1035 (Cherry 1900), p.3, CR1919 installed view. Not to scale.
Before you install
- Diameters offered: 1/8, 5/32, 3/16"
- Tool: Single action tooling (CA-1035): -04, -05: G704B tool with H747-456 pulling head; -04, -05, -06: G83/G84 tool with H1900-456 pulling head ("additional tip needed for non-washer version")
- Standard shop tooling.
- Training: Not stated in the cited documents.
- Lead-time risk: Medium
Installed preload
Not published in CA-1035. The governing NAS1900 procurement spec is paywalled and was not verified; treat preload as unpublished.
Removal
No published removal procedure found; follow the manufacturer's instructions. Steps: speclok.com/tooling/cherry-1900#removal
Accept / reject after install
- "Visible/Inspectable mechanical lock" (CA-1035). CA-1035 publishes no installed inspection limits; it states the rivets are "manufactured to NAS1919 and NAS1921" and meet the "NAS1900 procurement specification", which were not checked here.
- "Flush break eliminates need for shaving" (CA-1035).
- Recommended hole limits: -04 .129/.132", -05 .160/.164", -06 .192/.196" (CA-1035 tables).
Check gauges
- No gauge is published in CA-1035.
Sources: CA-1035 catalog. Acceptance limits belong to the controlling spec: verify against your program's process documentation before use on hardware.
Sources
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers