Shop verification card
Avdel Avdelok (industrial)
Avdel · Lockbolt (swaged collar) · 2621 brazier head / 2622 90° countersunk / 2624 truss head (steel) · 2691 stainless · 2801 aluminium
speclok.com
11/16/2026
Install sequence
1. Pin and collar
2. Swaged
3. Installed
Traced from Avdel Lockbolt Systems catalog, p.8, Typical placing sequence. Not to scale.
Before you install
- Diameters offered: 3/16, 1/4, 5/16, 3/8"
- Tool: Avdel placing tools, e.g. hydro-pneumatic 722 (all sizes 4.8-9.6 mm) and 734 (Avdel catalog)
- Proprietary system required.
- Training: Not stated in the cited documents.
- Lead-time risk: Low
Installed preload
Per-size clamp is not published in the catalog. Qualitative claims only: steel Avdelok pins "typically offer comparable values to property class 5.8"; Avdelok LD minimum shear/tensile/pre-load "equivalent to or exceeds property class 8.8 / ASTM A-325"; Avdelok XT headline "joint clamp (pre-load) of over 225 kN" for the large sizes.
Removal
No published removal procedure found; follow the manufacturer's instructions. Steps: speclok.com/tooling/avdelok#removal
Accept / reject after install
- Installed (swaged) collar dimensions are published per datasheet drawing: maximum installed collar length (S) and diameter (T) per size and collar style, e.g. 9.6 mm full collar: S max 18.6 mm, T max 15.5 mm.
- Pintail break and full swage; shear/tensile minima published per size (kN).
Check gauges
- No named gauges in the catalog checked; NAS1446-1452 swage-pin standards reference collar inspection gages (NAS1563) for the NAS-standard equivalents.
Sources: Avdel Lockbolt Systems catalog. Acceptance limits belong to the controlling spec: verify against your program's process documentation before use on hardware.
Sources
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers