← Screws
MS35207-249
MS35207 machine screw, pan head, cross-recessed, carbon steel
| Head / form | Pan head, cross-recessed |
|---|---|
| Diameter / thread / size | #8-36 UNF-2A (.1640) (dash 249) |
| Grip / length / thickness | length 1.000" (tolerance +0, -.031), not grip (Table I prints length only) |
| Material / finish | Carbon steel, cadmium plated (no coating code) |
| Reference confidence | high |
| Source | MS35207F (22 Oct 1970), Screw, Machine-Pan Head, Cross-Recessed, Carbon Steel, Cadmium Plated, UNF-2A (in./mm), Table I ↗ |
Head / form source: MS35207F title block
Source notes and limits
- "The MS part number consists of the MS number, plus the dash number" (sheet 2, note 7); Amendment 2 adds a protective coating code after the dash number.
- Minimum tensile load 880 lb (Table I, 60,000 psi basis).
- Amendment (29 September 1999): "Z INDICATES ZINC COATING"; "NO CODE INDICATES CADMIUM PLATING" (code after the dash number, e.g. -201Z).
- Amendment 2's example reads "MS35207-201Z ... .086-56, UNC-2A"; MS35207 Table I is UNF-2A (#2-64). The example text appears copied from MS35206; Table I governs here.
- Supersession: MS35207F, dated 22 OCTOBER 1970, is hereby canceled and superseded by NASM35207. The Part Identification Number (PIN) for MS35207F and the part number for NASM35207 are identical. The part numbers have not been changed. (MS35207F Notice 1, Notice of Cancellation (14 December 1999))
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers