AN935-B1016

Source notes and limits

• MS35338L Table II prints MS35338-107 as the substitutive washer for AN935-B1016. Size and material above are the substitute's (Table I), not read from an AN935 sheet.
• "MS35338 SUPERSEDES MS16214, MS35337, AN935, NAS1061, BECX1 AND BECX2, SEE TABLE II." (MS35338L p.2, note 2).
• Table II: "After 21 March 1966, (1) washers given on MS16214, MS35337, NAS1061, and this standard in part, are inactive for design and are canceled, but their existing stocks should be used for maintenance purposes until depleted and (2) washers are given on AN935 are inactivated for new design. Use only the following substitutive washers for new design and replacement."
• The AN935 sheet itself was not available; only MS35338L Table II's cross-reference is used.
• FAA AC 43.13-1B para 7-87 (p.7-15): "LOCKWASHERS (AN935 AND AN936). Lock washers may be used with machine screws or bolts whenever the self-locking or castellated type nut is not applicable. Do not use lock washers where frequent removal is required, in areas subject to corrosion, or in areas exposed to airflow. Use a plain washer between the lock washer and material to prevent gouging the surface of the metal."
• FAA AC 43.13-1B para 7-87 (CAUTION) (p.7-15): "CAUTION: Lock washers are not to be used on primary structures, secondary structures, or accessories where failure might result in damage or danger to aircraft or personnel."