← Screws
AN525D416-30
AN525 washer head screw
| Head / form | Washer head, slotted |
|---|---|
| Diameter / thread / size | .250-28UNF-3A (1/4-28) (dash 416) |
| Grip / length / thickness | length 1-7/8" (±1/32), grip 1-15/32" (G) |
| Material / finish | Aluminum alloy: "AL ALLOY ... TENSILE STRENGTH 62 000 PSI (MIN)" ("ADD "D" BEFORE FIRST DASH NUMBER FOR AL ALLOY SCREWS") |
| Reference confidence | high |
| Source | AN525 Rev. 2 (29 Jan 1985), Screw - Washer Head, with Amendment 1 (20 May 1996), sheet 1, notes 1-3 and dash table ↗ |
Head / form source: AN525 Rev 2 title block; note 3 (R = recessed head)
Source notes and limits
- "PART NUMBERS ADD R BETWEEN FIRST AND SECOND DASH NOS FOR RECESSED HEAD SCREWS ADD "D BEFORE FIRST DASH NUMBER FOR AL ALLOY SCREWS SIZE 8 AVAILABLE WITH NC THREAD ONLY" (note 3)
- Supersession: AN525, dated 29 January 1985, is hereby canceled and superseded by NASM525. The Part Identification Number (PIN) for AN525 and the part number for NASM525 are identical. The part numbers have not been changed. (AN525 Rev 2 Notice 1, Notice of Cancellation (21 June 2000))
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers