NAS9311M-6-11
- What it is
- NAS part number, 100° flush head, 3/16" (-6), oversize diameter diameter, max grip .687" (-11 = 11/16"), grip range .626-.687" (CA-1011 p.13). Decoded through its identical CR3552-6-11 (CherryMAX)
- Equivalents
- CR3552-6-11CherryCitedIdentical, Cherry CA-1015 (CherryMAX process manual), "NAS vs. CherryMAX® Cross-Reference List" p.27; also on the same NSN 5320-01-043-5864 ↗
- AF3552-6-11AllfastCatalog onlySame NSN 5320-01-043-5864 (government catalog). Not a maker's approval: confirm on the drawing.
- M7885/9-6-11MIL specificationsCatalog onlySame NSN 5320-01-043-5864 (government catalog). Not a maker's approval: confirm on the drawing.
+1 more reference numbers in the detail below.
- Install tooling, by who made the part
- Cherry-made: H701B-456 pulling head on a G704B, G747 or G800 riveter
- Allfast-made (as AF3552-6-11): not documented: no tool catalog on file names a nose for it.Ask a tooling specialist →
- Other makers: not documented. Check the maker on the CoC or packaging, then ask that maker or a tooling specialist.
The nose follows the maker, not the stock number: check the maker on the CoC or packaging.
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Reference only: the drawing and its process spec govern. How to read this
Every size and maker in the NAS9311M series →
Full detail: decode, cited documents, every stock number
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

