NAS9301B-6-04: CR3213-6-04

NAS9301B-6-04

What it is: NAS part number, Universal head, 3/16" (-6) diameter, max grip .250" (-04 = 4/16"), grip range .188-.250" (CA-1011 p.9). Decoded through its identical CR3213-6-04 (CherryMAX)
Equivalents: CR3213-6-04CherryCitedIdentical, Cherry CA-1015 (CherryMAX process manual), "NAS vs. CherryMAX® Cross-Reference List" p.27 ↗
Install tooling, by who made the part: Cherry-made: H701B-456 pulling head on a G704B, G747 or G800 riveter
Huck-made: 99-3442 nose on a 2013 tool
Other makers: not documented. Check the maker on the CoC or packaging, then ask that maker or a tooling specialist.
The nose follows the maker, not the stock number: check the maker on the CoC or packaging.

QtyInclude install toolingI already have the riveter

Request a tool: buy, rent or repair →

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Reference only: the drawing and its process spec govern. How to read this

Every size and maker in the NAS9301B series →

Full detail: decode, cited documents, every stock number

NAS9301B cross reference: every equivalent with its evidence, the sizes each maker lists, and what DLA paid →

CherryMAX: CHERRYMAX® RIVET — Image: Cherry Aerospace, CherryMAX® Rivet catalog CA-1011, p.1

NAS9301B-6-04

CherryMAX · Cherry · Blind rivet, universal head, nominal diameter

Head: Universal head
Diameter: 3/16" (-6)
Grip / length: max grip .250" (-04 = 4/16"), grip range .188-.250" (CA-1011 p.9)
Material: 5056 alum. alloy sleeve, 8740 alloy steel stem, A-286 CRES lock collar

Decoded as its identical part number CR3213-6-04 (Cherry CA-1015 (CherryMAX process manual), "NAS vs. CherryMAX® Cross-Reference List", p.27 ↗).

Numbering scheme: Cherry CA-1011 p.5, numbering system ↗

Install tooling, by who made the part

Cherry-made: H701B-456 pulling head on a G704B, G747 or G800 riveter
Huck-made: 99-3442 nose on a 2013 tool
Other makers: not documented. Check the maker on the CoC or packaging, then ask that maker or a tooling specialist.

QtyInclude install toolingI already have the riveter

The RFQ line lists the drop-in equivalents below as acceptable alternates.

Drop-in equivalents

Identical or approved-alternate part numbers, each with the document that states it.

Part number	Equivalence and source	Install tooling
CR3213-6-04Cherry AerospaceCross-reference this	IdenticalCherry CA-1015 (CherryMAX process manual), "NAS vs. CherryMAX® Cross-Reference List", p.27 ↗Cherry lists NAS9301B-x-xx as CR3213-x-xx: same diameter and grip dash numbers.Dash numbers carried over: the cited document prints both part numbers with the same dash structure.	Cherry-made: H701B-456 pulling head on a G704B, G747 or G800 riveter

CA-1015 Note 1: "X represents the diameter code, in 1/32" increments ... XX represents the grip code (two digits) in 1/16" increments". Example: NAS9301B-5-04 is a 5/32" diameter, 1/4" max grip fastener.

Related part numbers, not equivalents: HC3213, NAS9301BH

Group source: Cherry CA-1015 (CherryMAX process manual), "NAS vs. CherryMAX® Cross-Reference List", p.27 ↗

Image credits: Cherry Aerospace, CherryMAX® Rivet catalog CA-1011, p.1 ↗. Product images belong to their manufacturers.

Next step

Request a tool: buy, rent or repair →

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

All cross references →