MS35338-62

What it is: MS35338 helical spring lock washer, Lock washer, helical spring, regular (medium) series, nominal size NO.10 (.190); ID (A) .193-.200"; OD (B) .334" max, section thickness C .047" min (MS35338 Req. 4), width W .062" min
Equivalents: No equivalent on file: no maker document names one and the government catalog lists none on its stock number.
Install tooling, by who made the part: Not documented for this part number. Ask a tooling specialist →

Qty

Reference only: the drawing and its process spec govern. How to read this

Full detail: decode, cited documents, every stock number

Head: Lock washer, helical spring, regular (medium) series
Diameter: nominal size NO.10 (.190); ID (A) .193-.200"; OD (B) .334" max
Grip / length: section thickness C .047" min (MS35338 Req. 4), width W .062" min
Material: Carbon steel, phosphate (Table I column "CARBON STEEL / PHOS"; Req. 1a, 2a(1))

Install tooling, by who made the partNot documented for this part number.

Qty

Drop-in equivalents

Identical or approved-alternate part numbers, each with the document that states it.

No sourced equivalent on file for MS353386. SpecLok only lists an equivalent when a manufacturer or government document states it.

Possible NASM form, to verify: MS353386 / NASM353386. If a conversion exists, NASM is the converted form of the MS standard with an identical part number (e.g. MS90353U Notice 1). Not every MS has a NASM successor: verify the NASM document exists; the part may still be stocked as MS. MS90353U Notice 1: canceled and superseded by NASM90353, part numbers identical (everyspec) ↗