MS35207-265: AN526-1032R12, AN526C-1032R12, MS24584-57

MS35207-265

What it is: MS35207 machine screw, pan head, cross-recessed, carbon steel, Pan head, cross-recessed, #10-32 UNF-2A (.1900) (dash 265), length .750" (tolerance +0, -.031), not grip (Table I prints length only)
Equivalents: AN526-1032R12ANCatalog onlySame NSN 5305-00-993-1848 (government catalog). Not a maker's approval: confirm on the drawing.
AN526C-1032R12ANCatalog onlySame NSN 5305-00-993-1848 (government catalog). Not a maker's approval: confirm on the drawing.
MS24584-57MSCatalog onlySame NSN 5305-00-993-1848 (government catalog). Not a maker's approval: confirm on the drawing.
MS35207-57MSCatalog onlySame NSN 5305-00-993-1848 (government catalog). Not a maker's approval: confirm on the drawing.
+11 more reference numbers in the detail below.
Install tooling, by who made the part: Not documented for this part number. Ask a tooling specialist →

Qty

Reference only: the drawing and its process spec govern. How to read this

Full detail: decode, cited documents, every stock number

Head: Pan head, cross-recessed
Diameter: #10-32 UNF-2A (.1900) (dash 265)
Grip / length: length .750" (tolerance +0, -.031), not grip (Table I prints length only)
Material: Carbon steel, cadmium plated (no coating code)

Install tooling, by who made the partNot documented for this part number.

Qty

Identical or approved-alternate part numbers, each with the document that states it.

No sourced equivalent on file for MS352072. SpecLok only lists an equivalent when a manufacturer or government document states it.

Possible NASM form, to verify: MS352072 / NASM352072. If a conversion exists, NASM is the converted form of the MS standard with an identical part number (e.g. MS90353U Notice 1). Not every MS has a NASM successor: verify the NASM document exists; the part may still be stocked as MS. MS90353U Notice 1: canceled and superseded by NASM90353, part numbers identical (everyspec) ↗