MS24665-86: AN381-15-8, MS24665-85

MS24665-86

What it is: MS24665 cotter pin, Cotter pin (split), nominal 3/64 - .047; recommended hole .062" (Table I), length L 1/2" (Table V)
Equivalents: AN381-15-8ANCatalog onlySame NSN 5315-00-239-8019 (government catalog). Not a maker's approval: confirm on the drawing.
MS24665-85MSCatalog onlySame NSN 5315-00-239-8019 (government catalog). Not a maker's approval: confirm on the drawing.
+9 more reference numbers in the detail below.
Install tooling, by who made the part: Not documented for this part number. Ask a tooling specialist →

Qty

Reference only: the drawing and its process spec govern. How to read this

Full detail: decode, cited documents, every stock number

Head: Cotter pin (split)
Diameter: nominal 3/64 - .047; recommended hole .062" (Table I)
Grip / length: length L 1/2" (Table V)
Material: Corrosion resistant steel, cleaned, descaled and passivated per ASTM A380 (Table V; Requirement 2)

Install tooling, by who made the partNot documented for this part number.

Qty

Identical or approved-alternate part numbers, each with the document that states it.

No sourced equivalent on file for MS246658. SpecLok only lists an equivalent when a manufacturer or government document states it.

Possible NASM form, to verify: MS246658 / NASM246658. If a conversion exists, NASM is the converted form of the MS standard with an identical part number (e.g. MS90353U Notice 1). Not every MS has a NASM successor: verify the NASM document exists; the part may still be stocked as MS. MS90353U Notice 1: canceled and superseded by NASM90353, part numbers identical (everyspec) ↗