HC3212-4-05
- What it is
- Blind rivet, Huck part number. 1/8" diameter (-4), read from CR 3212 - 4 - 5 on the same NSN
- Equivalents
- NAS9302BH-4-05NASNeeds approvalFunctional substitute, needs engineering approval, Howmet, "How to order Huck-Clinch® Blind Rivets" p.2 ↗
- AF3212-4-05AllfastCatalog onlySame NSN 5320-01-133-2233 (government catalog). Not a maker's approval: confirm on the drawing.
- CR3212-4-05CherryCatalog onlySame NSN 5320-01-133-2233 (government catalog). Not a maker's approval: confirm on the drawing.
- CR3212-4-05CherryCatalog onlySame NSN 5320-01-133-2233 (government catalog). Not a maker's approval: confirm on the drawing.
- M7885/3-4-05MIL specificationsCatalog onlySame NSN 5320-01-133-2233 (government catalog). Not a maker's approval: confirm on the drawing.
- NAS1921B04-05PWNASCatalog onlySame NSN 5320-01-133-2233 (government catalog). Not a maker's approval: confirm on the drawing.
+2 more reference numbers in the detail below.
- Install tooling, by who made the part
- Huck-made: 99-3442 nose on a Model 2013 installation tool
- Allfast-made (as AF3212-4-05): not documented: no tool catalog on file names a nose for it.Ask a tooling specialist →
- Cherry-made (as CR3212-4-05): H701B-456 pulling head on a G704B, G747 or G800 riveter
- Other makers: not documented. Check the maker on the CoC or packaging, then ask that maker or a tooling specialist.
The nose follows the maker, not the stock number: check the maker on the CoC or packaging.
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Reference only: the drawing and its process spec govern. How to read this
Every size and maker in the HC3212 series →
Full detail: decode, cited documents, every stock number
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.