AN381-2-8: AN381-2-5, AN381-2-6, MS24664-151

AN381-2-8

What it is: AN381 cotter pin, Cotter pin, nominal 1/16; A .061" (+.000 -.003); recommended drill hole .067" (+.005 -.002), length .500" (L ±.031)
Equivalents: AN381-2-5ANCatalog onlySame NSN 5315-00-815-1405 (government catalog). Not a maker's approval: confirm on the drawing.
AN381-2-6ANCatalog onlySame NSN 5315-00-815-1405 (government catalog). Not a maker's approval: confirm on the drawing.
MS24664-151MSCatalog onlySame NSN 5315-00-815-1405 (government catalog). Not a maker's approval: confirm on the drawing.
MS24665-148MSCatalog onlySame NSN 5315-00-815-1405 (government catalog). Not a maker's approval: confirm on the drawing.
MS24665-149MSCatalog onlySame NSN 5315-00-815-1405 (government catalog). Not a maker's approval: confirm on the drawing.
MS24665-151MSCatalog onlySame NSN 5315-00-815-1405 (government catalog). Not a maker's approval: confirm on the drawing.
+33 more reference numbers in the detail below.
Install tooling, by who made the part: Not documented for this part number. Ask a tooling specialist →

Qty

Reference only: the drawing and its process spec govern. How to read this

Full detail: decode, cited documents, every stock number

Head: Cotter pin
Diameter: nominal 1/16; A .061" (+.000 -.003); recommended drill hole .067" (+.005 -.002)
Grip / length: length .500" (L ±.031)
Material: Corrosion-resistant steel (type C per procurement specification), passivate after pickling

Install tooling, by who made the partNot documented for this part number.

Qty

Identical or approved-alternate part numbers, each with the document that states it.

No sourced equivalent on file for AN381-2-8. SpecLok only lists an equivalent when a manufacturer or government document states it.