AN178H27: AN178-27, NAS57-27, NASM6812-27

AN178H27

What it is: AN178 close tolerance hex head bolt (AN173 THRU AN186), Hex head, close tolerance, .5000-20 UNF-3A, shank (A dia) .4991-.4986", grip 2.188" (±.016), length 2.969" (+.031 -.010 as printed) (AN173 THRU AN186 Rev. 7 sheet 3, Table II)
Equivalents: AN178-27ANCatalog onlySame NSN 5306-00-151-3087 (government catalog). Not a maker's approval: confirm on the drawing.
NAS57-27NASCatalog onlySame NSN 5306-00-151-3087 (government catalog). Not a maker's approval: confirm on the drawing.
NASM6812-27NASCatalog onlySame NSN 5306-00-151-3087 (government catalog). Not a maker's approval: confirm on the drawing.
Install tooling, by who made the part: Not documented for this part number. Ask a tooling specialist →

Qty

Reference only: the drawing and its process spec govern. How to read this

Full detail: decode, cited documents, every stock number

Head: Hex head, close tolerance
Diameter: .5000-20 UNF-3A, shank (A dia) .4991-.4986"
Grip / length: grip 2.188" (±.016), length 2.969" (+.031 -.010 as printed) (AN173 THRU AN186 Rev. 7 sheet 3, Table II)
Material: Non-corrosion resistant steel (no material letter)

Install tooling, by who made the partNot documented for this part number.

Qty

Identical or approved-alternate part numbers, each with the document that states it.

No sourced equivalent on file for AN178H27. SpecLok only lists an equivalent when a manufacturer or government document states it.