AF3242-4-08: CR3242-4-08, HC3242-4-08, M7885/7-4-08

AF3242-4-08

What it is: Blind rivet, Allfast part number. 1/8" diameter (-4), read from CR3242-4-08 on the same NSN
Equivalents: CR3242-4-08CherryCatalog onlySame NSN 5320-01-092-2125 (government catalog). Not a maker's approval: confirm on the drawing.
HC3242-4-08HuckCatalog onlySame NSN 5320-01-092-2125 (government catalog). Not a maker's approval: confirm on the drawing.
M7885/7-4-08MIL specificationsCatalog onlySame NSN 5320-01-092-2125 (government catalog). Not a maker's approval: confirm on the drawing.
NAS9305BNS-4-08NASCatalog onlySame NSN 5320-01-092-2125 (government catalog). Not a maker's approval: confirm on the drawing.
+1 more reference numbers in the detail below.
Install tooling, by who made the part: Allfast-made: not documented: no tool catalog on file names a nose for it.Ask a tooling specialist →
Cherry-made (as CR3242-4-08): H701B-456 pulling head on a G704B, G747 or G800 riveter
Huck-made (as HC3242-4-08): 99-3442 nose on a 2013 tool
Other makers: not documented. Check the maker on the CoC or packaging, then ask that maker or a tooling specialist.
The nose follows the maker, not the stock number: check the maker on the CoC or packaging.

Qty

Reference only: the drawing and its process spec govern. How to read this

Full detail: decode, cited documents, every stock number

Dash numbers not decoded: SpecLok has no structured decoder for this series. Read them from the controlling spec.

Install tooling, by who made the part

Qty

Identical or approved-alternate part numbers, each with the document that states it.

No sourced equivalent on file for AF3242-4-08. SpecLok only lists an equivalent when a manufacturer or government document states it.