Cross reference · NAS (Aerospace Industries Association)

NAS9306BH cross reference: Huck HC3245

NAS9306BH is a series. SpecLok lists its cited equivalents below.

NAS9306BH

What it is
NAS (Aerospace Industries Association) series
Equivalents
Install tooling, by who made the part

The nose follows the maker, not the stock number: check the maker on the CoC or packaging.

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Reference only: the drawing and its process spec govern. How to read this

Documented equivalents

1 cited
  • HC3245 Huck (Howmet) · Functional substitute, needs engineering approval
    Source

    Howmet, "How to order Huck-Clinch® Blind Rivets", p.2 ↗

    Howmet: Huck-Clinch rivets "also meet NAS1686 procurement and specification and can be ordered as" NAS9306BH (H = internal lock) or NAS9306BNS (no lock preference), not as NAS9306B (Huck's 2010 tool catalog lists NAS9306B under HuckMAX, p.79, and NAS9306BH under HUCK-CLINCH, p.81). The document prints no HC-to-NAS table: HC3245 is read from its codes (324 oversize diameter, head 5 Unisink, aluminum sleeve, alloy steel spindle), so this needs engineering approval. Both number the diameter in 1/32 in. and the max grip in 1/16 in. (examples HC3242-5-04, NAS 9301 B H -4 -05).

    Dash numbers carried over: the cited document prints both part numbers with the same dash structure.

Related, not equivalents (other head, material or the procurement spec): CR3245, NAS9306B

Series in the government catalog

0 stock numbers

Catalog-only listings need engineering approval before you substitute.

Manufacturers

Get quotes for NAS9306BH

Part number NAS9306BH (add the dash numbers on the quote)

Cited equivalents go on the request as acceptable alternates. Catalog-only listings do not.

Install tooling, by who made the part

The nose and tool follow who made the part, not the stock number: an equivalent fastener does not make another maker's noses interchangeable. Check the maker on the CoC or packaging, then use part number to tool.

Sources and how to read this page.Details

Reference numbers the Federal Logistics Information System records against the same National Stock Number. A supply-catalog cross-reference, not an engineering-approved interchangeability: confirm against the controlling drawing or spec before substituting. Only equivalents marked cited have a manufacturer or government document, linked with each.

Source: DLA Federal Logistics Information System, via DLA PUB LOG ↗ (FLIS Data Electronic Reading Room ↗), data as of 2025-03-18 (March 2025 snapshot). Federal supply classes . Issuer names are SpecLok's reading of the filing CAGE code; distributors are not named. Compiled 2026-10-03.

Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

Next step

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Look up a specific size →All cross references →