Cross reference · NAS (Aerospace Industries Association)
NAS9304BH cross reference: Huck HC3243
NAS9304BH is a series. SpecLok lists its cited equivalents below.
NAS9304BH
- What it is
- NAS (Aerospace Industries Association) series
- Equivalents
- Install tooling, by who made the part
- Huck-made: 99-3442 nose on a Model 2013 installation tool (for -4, -5, -6; other diameters take other noses)
- Other makers: not documented. Check the maker on the CoC or packaging, then ask that maker or a tooling specialist.
The nose follows the maker, not the stock number: check the maker on the CoC or packaging.
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.
Reference only: the drawing and its process spec govern. How to read this
- Issued by NAS
- Cross-referenced series 1
Documented equivalents
- HC3243 Huck (Howmet) · Functional substitute, needs engineering approval
Source
Howmet, "How to order Huck-Clinch® Blind Rivets", p.2 ↗
Howmet: Huck-Clinch rivets "also meet NAS1686 procurement and specification and can be ordered as" NAS9304BH (H = internal lock) or NAS9304BNS (no lock preference), not as NAS9304B (Huck's 2010 tool catalog lists NAS9304B under HuckMAX, p.79, and NAS9304BH under HUCK-CLINCH, p.81). The document prints no HC-to-NAS table: HC3243 is read from its codes (324 oversize diameter, head 3 protruding, aluminum sleeve, alloy steel spindle), so this needs engineering approval. Both number the diameter in 1/32 in. and the max grip in 1/16 in. (examples HC3242-5-04, NAS 9301 B H -4 -05).
Dash numbers carried over: the cited document prints both part numbers with the same dash structure.
Related, not equivalents (other head, material or the procurement spec): CR3243, NAS9304B
Series in the government catalog
Catalog-only listings need engineering approval before you substitute.
Manufacturers
- HC3243HuckSubstitute, needs approvalHowmet, "How to order Huck-Clinch® Blind Rivets", p.2 ↗
Get quotes for NAS9304BH
Part number NAS9304BH (add the dash numbers on the quote)
Cited equivalents go on the request as acceptable alternates. Catalog-only listings do not.
Install tooling, by who made the part
- Huck-made: 99-3442 nose on a Model 2013 installation tool (for -4, -5, -6; other diameters take other noses)Huck Aerospace Installation Equipment catalog (Jan 2010, archived), p.82, Model 2013, Standard Inline & Offset Nose Assemblies
- Other makers: not documented. Check the maker on the CoC or packaging, then ask that maker or a tooling specialist.
The nose and tool follow who made the part, not the stock number: an equivalent fastener does not make another maker's noses interchangeable. Check the maker on the CoC or packaging, then use part number to tool.
Sources and how to read this page.Details
Reference numbers the Federal Logistics Information System records against the same National Stock Number. A supply-catalog cross-reference, not an engineering-approved interchangeability: confirm against the controlling drawing or spec before substituting. Only equivalents marked cited have a manufacturer or government document, linked with each.
Source: DLA Federal Logistics Information System, via DLA PUB LOG ↗ (FLIS Data Electronic Reading Room ↗), data as of 2025-03-18 (March 2025 snapshot). Federal supply classes . Issuer names are SpecLok's reading of the filing CAGE code; distributors are not named. Compiled 2026-10-03.
Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers
Next step
Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.