Cross reference · NAS (Aerospace Industries Association) · Blind rivet plain nut

NAS1330C5EK cross reference: Avibank RNSS518, MS27130

NAS1330C5EK is a blind rivet plain nut series on 3 government stock numbers. It is cross-referenced to Avibank RNSS518, MS27130. Each one is labeled with how strong the evidence is.

NAS1330C5EK

What it is
Blind rivet plain nut series, on 3 government stock numbers
Equivalents
  • RNSS518AvibankCatalog onlyGovernment catalog: on 1 of 3 stock numbers. Confirm on the drawing.
  • MS27130MSCatalog onlyGovernment catalog: on 1 of 3 stock numbers. Confirm on the drawing.
  • MS27130CR140KMSCatalog onlyGovernment catalog: on 1 of 3 stock numbers. Confirm on the drawing.
  • MS27130CR142KMSCatalog onlyGovernment catalog: on 1 of 3 stock numbers. Confirm on the drawing.
Install tooling, by who made the part
  • Blind rivet nut (MS27130, now NAS1329 / NAS1330): C302

The nose follows the maker, not the stock number: check the maker on the CoC or packaging.

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Reference only: the drawing and its process spec govern. How to read this

Series in the government catalog

3 stock numbers

Catalog-only listings need engineering approval before you substitute.

Manufacturers

    1 more on one stock number each: RNSS518
    • RNSS518AvibankCatalog only, needs approvalon 1 of 3 stock numbers

    Standards

      3 more on one stock number each: MS27130, MS27130CR140K, MS27130CR142K
      • MS27130MSCatalog only, needs approvalon 1 of 3 stock numbers
      • MS27130CR140KMSCatalog only, needs approvalon 1 of 3 stock numbers
      • MS27130CR142KMSCatalog only, needs approvalon 1 of 3 stock numbers

      Plus 2 reference numbers whose issuer SpecLok does not identify (distributors and catalog agencies are not named).

      Get quotes for NAS1330C5EK

      Cited equivalents go on the request as acceptable alternates. Catalog-only listings do not.

      Install tooling, by who made the part

      • Blind rivet nut (MS27130, now NAS1329 / NAS1330): C302Böllhoff RIVNUT® catalog (US), p.29, Fastener/Tool Selection Guide, RIVNUT® column

      The nose and tool follow who made the part, not the stock number: an equivalent fastener does not make another maker's noses interchangeable. Check the maker on the CoC or packaging, then use part number to tool.

      Sizes by maker

      3 stock numbers
      Part numbers DLA FLIS lists for NAS1330C5EK and the series cross-referenced to it, by stock number
      NSNNAS1330C5EKRNSS518MS27130DLA median, 12 mo
      5310-01-038-8711NAS1330C5EK181MS27130-CR139K
      5310-01-010-9773NAS1330C5EK256
      5310-01-034-5331NAS1330C5EK406RNSS518-40GK

      Each row is one National Stock Number and the part numbers DLA FLIS lists on it, as written there. A blank means FLIS lists no part in that series on the stock number, not that the size does not exist.

      Sources and how to read this page.Details

      Reference numbers the Federal Logistics Information System records against the same National Stock Number. A supply-catalog cross-reference, not an engineering-approved interchangeability: confirm against the controlling drawing or spec before substituting. Only equivalents marked cited have a manufacturer or government document, linked with each.

      Source: DLA Federal Logistics Information System, via DLA PUB LOG ↗ (FLIS Data Electronic Reading Room ↗), data as of 2025-03-18 (March 2025 snapshot). Federal supply class 5310 Nuts and washers. Issuer names are SpecLok's reading of the filing CAGE code; distributors are not named. Compiled 2026-10-03.

      Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

      Next step

      Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

      Look up a specific size →All cross references →