Cross reference · Howmet Fastening Systems · Plate self-locking nut

K1101 cross reference: ESNA RMLHTA58, SPS 15700E, Cherry T2CH1032BCM, MS21050L

K1101 is a Howmet plate self-locking nut series on 3 government stock numbers. It is cross-referenced to ESNA RMLHTA58, SPS 15700E, Cherry T2CH1032BCM, MS21050L. Each one is labeled with how strong the evidence is.

K1101

What it is
Plate self-locking nut, Howmet series, on 3 government stock numbers
Equivalents
  • RMLHTA58ESNACatalog onlyGovernment catalog: on 3 of 3 stock numbers. Confirm on the drawing.
  • 15700ESPSCatalog onlyGovernment catalog: on 1 of 3 stock numbers. Confirm on the drawing.
  • T2CH1032BCMCherryCatalog onlyGovernment catalog: on 1 of 3 stock numbers. Confirm on the drawing.
  • T2CH1032MCherryCatalog onlyGovernment catalog: on 1 of 3 stock numbers. Confirm on the drawing.
  • T2CH832BCMCherryCatalog onlyGovernment catalog: on 1 of 3 stock numbers. Confirm on the drawing.
  • MS21050LMSCatalog onlyGovernment catalog: on 1 of 3 stock numbers. Confirm on the drawing.

+2 more reference numbers in the detail below.

Install tooling, by who made the part
Not documented for this part number. Ask a tooling specialist →

Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

Reference only: the drawing and its process spec govern. How to read this

Series in the government catalog

3 stock numbers

Catalog-only listings need engineering approval before you substitute.

Manufacturers

  • RMLHTA58ESNACatalog only, needs approvalon 3 of 3 stock numbers, 3 sizes
4 more on one stock number each: 15700E, T2CH1032BCM, T2CH1032M, T2CH832BCM
  • 15700ESPS TechnologiesCatalog only, needs approvalon 1 of 3 stock numbers
  • T2CH1032BCMCherry AerospaceCatalog only, needs approvalon 1 of 3 stock numbers
  • T2CH1032MCherry AerospaceCatalog only, needs approvalon 1 of 3 stock numbers
  • T2CH832BCMCherry AerospaceCatalog only, needs approvalon 1 of 3 stock numbers

Standards

    3 more on one stock number each: MS21050L, MS21050L08K, MS21050L3K
    • MS21050LMSCatalog only, needs approvalon 1 of 3 stock numbers
    • MS21050L08KMSCatalog only, needs approvalon 1 of 3 stock numbers
    • MS21050L3KMSCatalog only, needs approvalon 1 of 3 stock numbers

    Plus 4 reference numbers whose issuer SpecLok does not identify (distributors and catalog agencies are not named).

    Get quotes for K1101

    Cited equivalents go on the request as acceptable alternates. Catalog-only listings do not.

    Install tooling, by who made the part

    Not documented for K1101: no tool catalog or process document on file names its tooling.

    The nose and tool follow who made the part, not the stock number: an equivalent fastener does not make another maker's noses interchangeable. Check the maker on the CoC or packaging, then use part number to tool.

    Sizes by maker

    3 stock numbers
    Part numbers DLA FLIS lists for K1101 and the series cross-referenced to it, by stock number
    NSNK1101RMLHTA5815700ET2CH1032BCMMS21050LDLA median, 12 mo
    5310-00-782-0007K1101-3RMLHTA58-2860-0215700E-02MS21050L3
    5310-00-782-0012K1101-08BCRMLHTA58-2860-82BC
    5310-00-772-7969K1101-3BCRMLHTA58-2860-02BCT2CH1032BCM

    Each row is one National Stock Number and the part numbers DLA FLIS lists on it, as written there. A blank means FLIS lists no part in that series on the stock number, not that the size does not exist.

    Sources and how to read this page.Details

    Reference numbers the Federal Logistics Information System records against the same National Stock Number. A supply-catalog cross-reference, not an engineering-approved interchangeability: confirm against the controlling drawing or spec before substituting. Only equivalents marked cited have a manufacturer or government document, linked with each.

    Source: DLA Federal Logistics Information System, via DLA PUB LOG ↗ (FLIS Data Electronic Reading Room ↗), data as of 2025-03-18 (March 2025 snapshot). Federal supply class 5310 Nuts and washers. Issuer names are SpecLok's reading of the filing CAGE code; distributors are not named. Compiled 2026-10-03.

    Reference only: the controlling drawing, its process spec and the manufacturer's installation instructions govern. How to use these answers

    Next step

    Free to ask. A person at SpecLok replies by email. You only pay the supplier if you accept a quote.

    Look up a specific size →All cross references →